BICHENGPCBBicheng Technologies Limited

6-Layer HDI Circuit Board Via in Pad PCB for GPS Tracking Applications

(Custom PCBs are tailored products; the images and specifications provided are for reference only.)

Brief introduction

A 6-layer ultrathin printed circuit board (PCB) is built on an FR-4 substrate with a Tg of 135°C, specifically designed for GPS tracking applications. With a thickness of just 0.6 mm, the PCB features a green solder mask (Taiyo) and immersion gold on the pads, without any silkscreen. The base material is sourced from Taiwan's ITEQ, providing one PCB per panel. The vias, measuring 0.25 mm, are resin-filled and capped (via in pad), with blind vias extending from the top layer to inner layer 1 and buried vias connecting inner layer 3 to inner layer 4. Fabrication complies with IPC 6012 Class 2 standards using supplied Gerber data, and each shipment contains 50 panels.

Technical features & benefits

  • Via in Pad Design: Reduces inductive and capacitive reactance in transmission lines.
  • Immersion Gold Finish: Ensures high solderability, minimizes stress on circuit boards, and reduces surface contamination.
  • Certified Manufacturing: Products are certified by authorized organizations.
  • High First Production Rate: Over 95% of products meet quality standards on the first production run.
  • Scalable Production: Capable of transitioning from prototype to volume production.
  • Timely Delivery: Achieves over 98% on-time delivery rate.
  • Expertise: More than 18 years of experience in PCB manufacturing.
  • IPC Compliance: Manufactured to IPC Class 2 and Class 3 standards.

Product images

6-Layer Via-in-Pad HDI PCB Top View
6-Layer Via-in-Pad HDI PCB Bottom View
6-Layer Via-in-Pad HDI PCB Detailed View

PCB specifications

PCB SIZE100 x 103mm=1PCS
BOARD TYPEMultilayer PCB
Number of Layers6 layers
Surface Mount ComponentsYES
Through Hole ComponentsNO
TECHNOLOGY—
Minimum Trace and Space:3mil/3mil
Minimum / Maximum Holes:0.22/3.50mm
Number of Different Holes:25
Number of Drill Holes:2315
Number of Milled Slots:0
Number of Internal Cutouts:0
Impedance Controlno
BOARD MATERIAL—
Glass Epoxy:FR-4, ITEQ IT140 TG>135, er<5.4
Final foil external:1oz
Final foil internal:0.5oz
Final height of PCB:0.6mm ±0.1
PLATING AND COATING—
Surface FinishImmersion gold 0.025µm over 3µm Nickel (14.4% area)
Solder Mask Apply To:TOP and Bottom, 12micron Minimum
Solder Mask Color:Green, TAIYO PSR-2000 GT600D
Solder Mask Type:LPSM
CONTOUR/CUTTINGRouting
MARKING—
Side of Component LegendNo silkscreen required.
Colour of Component LegendNo silkscreen required.
Manufacturer Name or Logo:No silkscreen required.
VIAPlated through hole(PTH), Blind via and via capping on CS and PS, vias not be visible.
FLAMIBILITY RATINGUL 94-V0 Approval MIN.
DIMENSION TOLERANCE—
Outline dimension:0.0059" (0.15mm)
Board plating:0.0030" (0.076mm)
Drill tolerance:0.002" (0.05mm)
TEST100% Electrical Test prior shipment
TYPE OF ARTWORK TO BE SUPPLIEDemail file, Gerber RS-274-X, PCBDOC etc
SERVICE AREAWorldwide, Globally.

Layer stack-up

  • copper ------- 18um(0.5oz)+plate TOP CS
  • 4mil prepreg
  • copper ------- 18um(0.5oz) GND Plane
  • 4mil FR-4
  • copper ------- 18um(0.5oz) PWR Plane
  • 4mil prepreg
  • copper ------- 18um(0.5oz) PWR Plane
  • 4mil FR-4
  • copper ------- 18um(0.5oz) SIG
  • 4mil prepreg
  • copper ------- 18um(0.5oz) BOT PS

Application areas

  • LED Lighting, Intercom Systems, Portable WiFi Routers, GSM Trackers, Commercial LED Lighting, 4G WiFi Modems, Honeywell Access Control, Electronic Access Control Systems, Audio Frequency Amplifiers, File Servers

Via in Pad Technology

As circuit boards become denser and more interconnected, the need for efficient routing has led to the development of via in pad technology. This method involves plating through holes that are filled with insulating resin, followed by drying, grinding, and electroplating. As a result, the entire surface of the PCB is coated with copper, eliminating visible via holes.

The benefits of via in pad technology include improved electrical performance and reliability, shortened signal transmission paths, reduced inductive and capacitive reactance, and minimized electromagnetic interference.

Basic Process of Via in Pad

Drilling and Filling: Holes are drilled and filled with insulating resin.

Drying and Grinding: The surface is dried and ground to a smooth finish.

Electroplating: The entire surface receives a copper coating, enhancing conductivity.

This innovative approach is essential for modern high-performance electronic products.

Process of Via in Pad

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com