12-Layer Through Holes PCB for High-Performance Applications
(Custom PCBs are tailored products; the images and specifications provided are for reference only.)
Brief introduction
IT-180ATC is an advanced high Tg (175°C by DSC) multifunctional filled epoxy known for its high thermal reliability and CAF resistance. This material is suitable for various applications and can withstand lead-free assembly temperatures of up to 260°C.
Technical features & benefits
- Dielectric Constant: DK of 4.1 at 10 GHz
- Dissipation Factor: 0.017 at 10 GHz
- Thermal Resistance: T260 > 60 minutes, T288 > 20 minutes
- Peel Strength: Minimum standard ED copper of 8 lbs/inch
- Coefficient of Thermal Expansion (CTE): Matched to copper with X-axis of 11-13 ppm/°C and Y-axis of 13-15 ppm/°C
- Z-axis CTE: Low at 45 ppm/°C
- Tg: Greater than 175°C
- Moisture Absorption: Low at 0.1%
- Flammability Rating: UL 94-V0
Product images
PCB specifications
| Parameter | Specification |
| Material Type | IT-180A, FR-4, Tg ≥ 170°C |
| Layer Count | 12 layers |
| Solder Mask | Both sides, Matt Red |
| Silkscreen Print | Top side, White |
| Surface Finish | ENIG |
| Total Board Thickness | 1.6 mm ± 10% |
| Board Size | 80.15 mm × 76.6 mm (1 PCS) |
| Minimum Hole Size | 0.2 mm |
| Solder Mask Thickness | ≥ 10 µm |
| Minimum Dielectric Thickness | ≥ 100 µm |
| Minimum Trace Line Width | ≥ 120 µm |
| Minimum Spacing | ≥ 125 µm |
| Plated Through Holes | L1 – L12 |
| Blind & Buried Vias | L1-L5, L7-L10, L7-L12 |
| Impedance Control | See table below |
Layer stack-up
- TYPE:COPPER;LAYER NO.:1;THICKNESS (µm):45;SPECIFICATION:18 µm BASE COPPER + 25 µm PLATING
- TYPE:FR-4;LAYER NO.:PP;THICKNESS (µm):150;SPECIFICATION:IPC-4101/24;COPPER;2;17
- TYPE:FR-4 IT-180;LAYER NO.:Core;THICKNESS (µm):135;SPECIFICATION:IPC-4101/24;COPPER;3;17
- TYPE:FR-4;LAYER NO.:PP;THICKNESS (µm):153;SPECIFICATION:IPC-4101/24;COPPER;4;17
- TYPE:FR-4 IT-180;LAYER NO.:Core;THICKNESS (µm):115;SPECIFICATION:IPC-4101/24;COPPER;5;17
- TYPE:FR-4;LAYER NO.:PP;THICKNESS (µm):94;SPECIFICATION:IPC-4101/24;COPPER;6;17
- TYPE:FR-4 IT-180;LAYER NO.:Core;THICKNESS (µm):115;SPECIFICATION:IPC-4101/24;COPPER;7;17
- TYPE:FR-4;LAYER NO.:PP;THICKNESS (µm):94;SPECIFICATION:IPC-4101/24;COPPER;8;17
- TYPE:FR-4 IT-180;LAYER NO.:Core;THICKNESS (µm):115;SPECIFICATION:IPC-4101/24;COPPER;9;17
- TYPE:FR-4;LAYER NO.:PP;THICKNESS (µm):150;SPECIFICATION:IPC-4101/24;COPPER;10;17
- TYPE:FR-4 IT-180;LAYER NO.:Core;THICKNESS (µm):135;SPECIFICATION:IPC-4101/24;COPPER;11;17
- TYPE:FR-4;LAYER NO.:PP;THICKNESS (µm):150;SPECIFICATION:IPC-4101/24
- TYPE:COPPER;LAYER NO.:12;THICKNESS (µm):45;SPECIFICATION:18 µm BASE COPPER + 25 µm PLATING
PCB Statistics
Components: 240
Total Pads: 482
Thru Hole Pads: 234
Top SMT Pads: 138
Bottom SMT Pads: 110
Vias: 256
Nets: 10
Application areas
- Automotive (Engine Room ECU), Backplanes, Data Storage, Server and Networking, Telecommunications
Impedance Control Requirements
| Impedance | Type | Layer | Trace / Gap | Reference Layer(s) |
|---|---|---|---|---|
| 50 Ω | Differential Pair | Top (L1) | 4 mil / 4 mil | L2 |
| 90 Ω | Differential Pair | Top (L1) | 5 mil / 6 mil | L2 |
| 100 Ω | Differential Pair | Top (L1) | 6 mil / 9 mil | L2 |
| 50 Ω | Differential Pair | L3 | 5 mil / 5 mil | L2, L4 |
| 90 Ω | Differential Pair | L5 | 7 mil / 6 mil | L4, L6 |
| 100 Ω | Differential Pair | L8 | 6 mil / 6 mil | L7, L9 |
All 0.2 mm and 0.3 mm vias are filled and capped according to IPC 4761 Type VII. A printing series number is required.
Standards and Availability
Artwork Type: Gerber RS-274-X
Accepted Standard: IPC-Class-2
Availability: Worldwide
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
