BICHENGPCBBicheng Technologies Limited

TP600 2-Layer 5.1mm Thick PCB – High-Frequency Thermoplastic ENIG Board for RF Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

1. Introduction to TP600 2-Layer 5.1mm Thick PCB

TP material is a unique high-frequency thermoplastic in the industry. The dielectric layer of TP-type laminates consists of ceramics and polyphenylene oxide (PPO) resin, without fiberglass reinforcement. The dielectric constant can be precisely adjusted by varying the ratio between ceramics and PPO resin. The production process is specialized, offering excellent dielectric performance and high reliability. TP denotes the smooth surface material without copper cladding, TP-1 indicates single-sided cladding, and TP-2 refers to double-sided cladding. The dielectric constant can be customized between 3 and 25 according to circuit requirements, with common values including 3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 9.8, 10.2, 11, 16, and 20.

Dielectric constant (Dk) of 6.0 ± 0.12 at 10GHz Low dissipation factor of 0.0010 at 10GHz Low TCDK: -50 ppm/°C (-55°C to 150°C) CTE: x-axis 50 ppm/°C, y-axis 50 ppm/°C, z-axis 60 ppm/°C (-55°C to 150°C) Thermal conductivity: 0.55 W/m·K Moisture absorption: 0.01% UL 94-V0 rated

Customizable dielectric constant (3–25) No fiberglass reinforcement for smooth surface and consistent Dk Suitable for high-frequency and high-reliability applications Good thermal and mechanical stability

5. PCB Stackup (2-Layer Rigid Structure)

Copper_layer_1 - 35 μm TP600 Core - 5.08 mm (200mil) Copper_layer_2 - 35 μm

Components: 4Total Pads: 16Thru Hole Pads: 10Top SMT Pads: 6Bottom SMT Pads: 0Vias: 9Nets: 2

Global Satellite Navigation SystemsMissile-borne systemsFuze technologyMiniaturized antennas

Artwork Format: Gerber RS-274-XAccepted Standard: IPC-Class-2Availability: Worldwide

TP600 PCB

PCB specifications

Base MaterialTP600
Layer CountDouble sided
Board Dimensions25mm × 25mm (±0.15mm)
Min. Trace/Space6 mil / 7 mil
Min. Hole Size0.7 mm
Blind ViasNo
Finished Board Thickness5.1 mm
Finished Cu Weight (Outer)1 oz
Via Plating Thickness20 μm
Surface FinishENIG (Electroless Nickel Immersion Gold)
Top/Bottom SilkscreenNo
Top/Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com