BICHENGPCBBicheng Technologies Limited

Rogers TMM10 1-Layer 60mil OSP PCB – High Frequency Microwave Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

MOQ
1PCS
Lead time
7-13 working days
Packaging
Vacuum / Anti-static Packaging
Payment
T/T, Paypal

Brief introduction

TMM® 10 thermoset microwave materials offer the benefits of both PTFE and ceramic based substrates, but are not limited by the same mechanical properties and production techniques. TMM10 laminates combine many of the desirable features of ceramic substrates with the ease of soft substrate processing techniques.

TMM10 laminates have an exceptionally low thermal coefficient of dielectric constant, typically less than 30 ppm/°C. The material's isotropic coefficients of thermal expansion, very closely matched to copper, allow for production of high reliability plated through holes, and low etch shrinkage values. This 1-layer (single-sided) rigid PCB is constructed entirely with TMM10 as the core material, making it ideal for chip testers, dielectric polarizers, satellite communication, and GPS antenna applications.

Dielectric Constant (Dk): 9.20 ± 0.230 at 10 GHz

Decomposition Temperature (Td): 425 °C TGA

Mechanical properties resist creep and cold flow

Resistant to process chemicals, reducing damage during fabrication

Material does not require sodium napthanate treatment prior to electroless plating

Based on thermoset resin, allowing for reliable wire-bonding

Combines benefits of ceramic and PTFE substrates without specialized production techniques

Exceptional Dk uniformity (9.20 ± 0.23) for consistent impedance control

Low dissipation factor (0.0022) ensures high performance at microwave frequencies

CTE matched to copper enables high reliability plated through holes

High thermal conductivity (0.76 W/m/K) facilitates heat removal

Thermoset resin does not soften when heated, preventing pad lifting during wire bonding

Resistant to etchants and solvents used in PCB production

Can replace alumina substrates in many applications

5. PCB Stackup (1-Layer Rigid Structure)

7. Rogers TMM10 Material – Product Introduction

TMM® thermoset microwave materials are ceramic, hydrocarbon, thermoset polymer composites designed for high plated-thru-hole reliability stripline and microstrip applications. TMM laminates are available in a wide range of dielectric constants and claddings.

The electrical and mechanical properties of TMM laminates combine many of the benefits of both ceramic and traditional PTFE microwave circuit laminates, without requiring the specialized production techniques common to these materials. TMM laminates do not require a sodium napthanate treatment prior to electroless plating.

TMM laminates are based on thermoset resins, and do not soften when heated. As a result, wire bonding of component leads to circuit traces can be performed without concerns of pad lifting or substrate deformation. TMM laminates combine many of the desirable features of ceramic substrates with the ease of soft substrate processing techniques.

9. TMM10 Typical Properties (Data Sheet)

Type of artwork supplied: Gerber RS-274-X

12. Standard Thicknesses, Panel Sizes & Claddings

Application areas

  • Dielectric Constant (Dk): 9.20 ± 0.230 at 10 GHz
  • Dissipation Factor: 0.0022 at 10 GHz
  • Thermal coefficient of Dk: -38 ppm/°K
  • CTE matched to copper (21/21/20 ppm/K)
  • Decomposition Temperature (Td): 425 °C TGA
  • Thermal Conductivity: 0.76 W/m/K
  • Mechanical properties resist creep and cold flow
  • Resistant to process chemicals, reducing damage during fabrication
  • Based on thermoset resin, allowing for reliable wire-bonding
Rogers TMM10 1-Layer OSP PCB
TMM10 Material

PCB specifications

Base materialRogers TMM10 (ceramic thermoset polymer composite)
Layer countSingle Sided (1-layer)
Board dimensions99.05mm x 56.9mm = 1 PCS, ±0.15mm
Minimum Trace/Space4/5 mils
Minimum Hole Size0.35mm
Blind viasNo
Finished board thickness1.6mm (60mil core)
Finished Cu weight1 oz (35 μm / 1.4 mils) outer layers
Via plating thickness20 μm
Surface finishOSP
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

Layer stack-up

  1. Copper_layer_1 (Top) · Copper · 35 μm (1 oz)copper
  2. Dielectric · Rogers TMM10 Core · 1.524 mm (60mil)core

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com