Rogers RT/duroid 6002 2-Layer 0.8mm Immersion Silver PCB – Phased Array & Radar
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers RT/duroid 6002 laminates are ceramic-filled PTFE microwave materials with low dielectric constant for use in complex microwave structures. They are also low loss materials that provide excellent high frequency performance. Offering excellent mechanical and electrical properties, these materials are reliable for use in multi-layer board constructions.
This 2-layer rigid PCB is constructed entirely with RT/duroid 6002 as the core material, providing exceptional signal integrity, thermal stability, and low-loss performance for demanding RF, microwave, and space-grade applications.
Dielectric constant (Dk) of 2.94 +/- 0.04
Low thermal coefficient of Dk at 12 ppm/°C
Low Z-axis coefficient of thermal expansion at 24 ppm/°C
Low loss for excellent high frequency performance
In-plane expansion coefficient matched to copper; ideal for applications sensitive to temperature change
Low out-gassing; ideal for space applications
Excellent mechanical and electrical properties; reliable multi-layer board constructions
4.Rogers RT/duroid 6002 Construction Details
Copper_layer_1 – 35 μm Rogers RT/duroid 6002 Substrate – 30 mil (0.762 mm) Copper_layer_2 – 35 μm
Components: 94 Total Pads: 241 Thru Hole Pads: 196 Top SMT Pads: 45 Bottom SMT Pads: 0 Vias: 126 Nets: 2
Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide
9.Rogers RT/duroid 6002 High-Frequency Laminate – Product Introduction
RT/duroid® 6002 microwave material was the first low loss and low dielectric constant laminate to offer superior electrical and mechanical properties essential in designing complex microwave structures which are mechanically reliable and electrically stable.
The thermal coefficient of dielectric constant is extremely low from -55°C to +150°C (-67°F to 302°F) which provides the designers of filters, oscillators and delay lines the electrical stability needed in today's demanding applications.
A low Z axis coefficient of thermal expansion (CTE) ensures excellent reliability of plated through-holes. RT/duroid 6002 materials have been successfully temperature cycled (-55°C to 125°C [-67°F to 257°F]) for over 5000 cycles without a single via failure.
Excellent dimensional stability (0.2 to 0.5 mils/inch) is achieved by matching the X and Y coefficient of expansion to copper. This often eliminates double etching to achieve tight positional tolerances.
The low tensile modulus (X,Y) greatly reduces the stress applied to solder joints and allows the expansion of the laminate to be constrained by a minimum amount of low CTE metal (6 ppm/°C), further increasing surface mount reliability.
½ oz. to 2 oz./ft² electrodeposited copper, ½ oz. to 1 oz. reverse treated electrodeposited copper or ½ oz. to 2 oz./ft² rolled copper may be specified as cladding on dielectric thicknesses from 0.005" to 0.125" (0.13 to 3.18mm). RT/duroid 6002 laminate is also available clad with aluminum, brass, or copper plates and resistive foils.
Applications particularly suited to the unique properties of RT/duroid 6002 material include flat and non-planar structures such as antennas, complex multi-layer circuits with inter-layer connections, and microwave circuits for aerospace designs in hostile environments. RT/duroid 6002 laminates have Underwriters Laboratories recognition under classification 94V-0 (Vertical Flammability Test).
Successfully temperature cycled over 5000 cycles without via failure
Complex multi-layer circuits with inter-layer connections
Aerospace microwave circuits in hostile environments
13.Standard Thicknesses, Panel Sizes & Claddings
*Additional non-standard thicknesses available from 0.005" to 0.250" in increments of 0.005"*
Additional claddings such as heavy metal, resistive foil, and unclad are available
Application areas
- Dielectric constant (Dk) of 2.94 +/- 0.04
- Low thermal coefficient of Dk at 12 ppm/°C
- Dissipation factor of 0.0012 at 10GHz
- Td 500 °C TGA
- Thermal Conductivity of 0.6 W/m/k
- Low Z-axis coefficient of thermal expansion at 24 ppm/°C
- Moisture Absorption of 0.02%
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
