RT/duroid 6202 2-Layer 0.2mm ENIG PCB for High-Frequency Microwave Applications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers RT/duroid 6202 high frequency circuit materials are low loss and low dielectric constant laminates with limited woven glass reinforcement. It offers electrical and mechanical properties essential in designing complex microwave structures that are mechanically reliable and electrically stable. Excellent dimensional stability (0.05 to 0.07 mils/inch) is achieved by the addition of limited woven glass reinforcement. This often eliminates double etching to achieve tight positional tolerances.
Dielectric constant (Dk) of 2.94 ±0.04 to 3.06 ±0.04 depending on thickness, 10GHz/23°C The DK of 0.005″ laminates are 3.06 ± 0.04 0.010″ and 0.015″ laminates are 3.02 ± 0.04 ≥0.020″ laminates are 2.94 ± 0.04 Dissipation factor of 0.0015 at 10 GHz/23°C Low thermal coefficient of Dk at 5 ppm/°C, at 10 GHz ranging -50 to +150°C Coefficient of Thermal Expansion (-55 to 288 °C) X-axis of 15, Y of 15, Z of 30 ppm/°C Td 500 °C TGA Thermal Conductivity of 0.68 W/m/k Moisture Absorption of 0.04% UL 94-V0
Low loss for excellent high frequency performance In-plane expansion coefficient matched to copper Excellent electrical and mechanical properties Very low etch shrinkage
Copper layer 1 - 35 μm Rogers RT/duroid 6202 Substrate - 5mil (0.127mm) Copper layer 2 - 35 μm
Phased Array Antennas Ground Based and Airborne Radar Systems Global Positioning System Antennas Power Backplanes Commercial Airline Collision Avoidance Beam Forming Networks
IPC-Class 2 compliant 100% electrical tested Global availability Gerber RS-274X support
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
