RT/duroid 5880 PCB 2-layer 10mil Copper Filled Via
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers RT/duroid 5880 high-frequency laminates are advanced PTFE composites reinforced with glass microfibers, specifically designed for precision stripline and microstrip circuit applications. The randomly oriented microfibers ensure exceptional uniformity of the dielectric constant across the material.
The dielectric constant of RT/duroid 5880 laminates remains consistent from panel to panel and stable over a wide frequency range. Their low dissipation factor enhances the applicability of RT/duroid 5880 laminates to Ku-band frequencies and beyond.
These laminates can be easily cut, sheared, and machined into various shapes. Additionally, they exhibit resistance to all solvents and reagents, whether hot or cold, that are typically used in etching printed circuits or plating edges and holes.
Dielectric Constant: 2.2 with a tight tolerance of 0.02 at 10 GHz/23°C Dissipation Factor: 0.0009 at 10 GHz Temperature Coefficient of Dielectric Constant (TCDk): -125 ppm/°C Low Moisture Absorption: 0.02% CTE: X-axis 31 ppm/°C, Y-axis 48 ppm/°C, Z-axis 237 ppm/°C Isotropic Properties: Yes
Uniform electrical properties across a wide frequency rangeEasily cut, sheared, and machined to desired shapesResistant to solvents and reagents used in etching or platingIdeal for high-moisture environmentsWell-established material with a proven track recordLowest electrical loss among reinforced PTFE materials
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
