BICHENGPCBBicheng Technologies Limited

Rogers RT/duroid 5880 4-Layer Hybrid RF/FR-4 PCB with Immersion Silver

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

RT/duroid 5880 is a glass microfiber reinforced PTFE composite designed for high-performance stripline and microstrip printed circuit board applications. With a dielectric constant of 2.20 and ultra-low dissipation factor, it provides exceptional electrical consistency and signal integrity, making it suitable for demanding RF and microwave systems up to Ku-band and beyond.

Low and Stable Dielectric Constant: Dk = 2.20 ±0.02 at 10 GHz, with excellent uniformity and frequency stability. Ultra-Low Loss: Dissipation factor as low as 0.0009 at 10 GHz, supporting high-frequency, low-loss designs. Excellent Thermal Stability: Thermal coefficient of εr = –125 ppm/°C, ensuring reliable performance across temperature ranges. High Electrical Insulation: Volume resistivity ≥2×10⁷ MΩ·cm and surface resistivity ≥3×10⁷ MΩ. Good Mechanical Properties: Balanced tensile and compressive modulus for reliable PCB fabrication and assembly. Lead-Free Process Compatible: Yes. Flammability Rating: UL94 V-0.

Layer 1 (Top): RT5880 – 0.254mm Prepreg: TG170 FR-4 – 0.204mm Layer 2 & 3: Core – RT5880 – 0.254mm Layer 4 (Bottom): RT5880 – 0.254mm Total Finished Thickness: 0.833mm

RF & Microwave Circuits: Stripline and microstrip designs for communication systems Ku-band and Above Applications: Satellite communications, radar systems Aerospace & Defense: Avionics, phased array antennas, electronic warfare Test & Measurement: High-frequency probes, calibration substrates Medical Electronics: High-frequency imaging and diagnostic equipment

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

RT/duroid 5880 4-Layer Hybrid PCB Stackup

PCB specifications

Layer Structure4-layer hybrid stackup: RT5880 + FR-4 prepreg + RT5880
Outer Layers1 oz (35 µm) copper
Inner Layers0.5 oz (17.5 µm) copper
Board Dimensions126mm × 63mm (±0.15mm)
Minimum Trace/Space5/5 mils
Minimum Hole Size0.2mm
Via Pad Size0.5mm
Via TypeThrough-hole only, no blind/buried vias
Finished Board Thickness0.833mm
Surface FinishImmersion Silver
Solder MaskGreen, no silkscreen
Electrical Test100% prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com