BICHENGPCBBicheng Technologies Limited

RT/duroid 5880 2-Layer 0.45mm Immersion Gold PCB for High-Frequency Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers RT/duroid 5880 high frequency laminates are PTFE composites reinforced with glass microfibers, designed for exacting stripline and microstrip circuit applications. The randomly oriented microfibers result in exceptional dielectric constant uniformity. The dielectric constant of RT/duroid 5880 laminates is uniform from panel to panel and is constant over a wide frequency range. Its low dissipation factor extends the usefulness of RT/duroid 5880 laminates to Ku-band and above. These laminates are easily cut, sheared and machined to shape. They are resistant to all solvents and reagents, hot or cold, normally used in etching printed circuits or in plating edges and holes.

Dielectric constant of 2.2 +/- 0.02 at 10 GHz/23°C Dissipation factor of 0.0009 at 10GHz Temperature coefficient of dielectric constant (TCDk) of -125 ppm/°C Low Moisture Absorption 0.02% CTE in X-axis of 31 ppm/°C, Y-axis of 48 ppm/°C and Z-axis of 237 ppm/°C Td 500°C TGA UL 94-V0 Lead free Process compatible Isotropic

Uniform electrical properties over wide frequency range Easily cut, sheared and machined to shape Resistant to solvents and reagents used in etching or plating edges and holes Ideal for high moisture environments Well-established material Lowest electrical loss for reinforced PTFE material

Copper_layer_1 - 35 μm RT/duroid 5880 - 0.381 mm (15mil) Copper_layer_2 - 35 μm

Components: 38 Total Pads: 147 Thru Hole Pads: 121 Top SMT Pads: 26 Bottom SMT Pads: 0 Vias: 55 Nets: 2

Commercial Airline Broadband Antennas Microstrip and Stripline Circuits Millimeter Wave Applications Radar Systems Guidance Systems Point to Point Digital Radio Antennas

IPC-Class 2 compliant 100% electrical tested Global availability Gerber RS-274X support

RT/duroid 5880 PCB

PCB specifications

Base MaterialRT/duroid 5880
Layer Count2 layers
Board Dimensions135mm x 105mm (±0.15mm)
Minimum Trace/Space3.9/3.9 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Thickness0.45mm
Finished Cu Weight1oz (1.4 mils)
Via Plating Thickness20 μm
Surface FinishImmersion Gold
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com