BICHENGPCBBicheng Technologies Limited

Rogers RT/duroid 5870 2-Layer 0.3mm ENIG PCB – Microstrip & Radar Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers RT/duroid 5870 high frequency laminates are PTFE composites reinforced with glass microfibers, designed for exacting stripline and microstrip circuit applications. The randomly oriented microfibers result in exceptional dielectric constant uniformity.

The dielectric constant of RT/duroid 5870 laminates is uniform from panel to panel and is constant over a wide frequency range. Its low dissipation factor extends the usefulness of RT/duroid 5870 laminates to Ku-band and above.

RT/duroid 5870 laminates are easily cut, sheared and machined to shape. They are resistant to all solvents and reagents, hot or cold, normally used in etching printed circuits or in plating edges and holes.

This 2-layer rigid PCB is constructed entirely with RT/duroid 5870 as the core material, providing exceptional signal integrity, dielectric constant uniformity, and low-loss performance for demanding RF, microwave, and millimeter wave applications.

Dielectric constant of 2.33 with tight tolerance ±0.02 at 10 GHz

Temperature coefficient of dielectric constant (TCDk) of -115 ppm/°C

CTE in X-axis of 22 ppm/°C, Y-axis of 28 ppm/°C and Z-axis of 173 ppm/°C

Uniform electrical properties over wide frequency range

Easily cut, sheared and machined to shape

Resistant to solvents and reagents used in etching or plating edges and holes

Lowest electrical loss for reinforced PTFE material

4.RT/duroid 5870 PCB Construction Details

Copper_layer_1 – 35 μm RT/duroid 5870 – 0.254 mm (10 mil) Copper_layer_2 – 35 μm

Components: 36 Total Pads: 56 Thru Hole Pads: 32 Top SMT Pads: 24 Bottom SMT Pads: 0 Vias: 28 Nets: 2

Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide

9.RT/duroid 5870 High Frequency Laminates – Product Introduction

RT/duroid® 5870 glass microfiber reinforced PTFE composites are designed for exacting stripline and microstrip circuit applications.

The randomly oriented microfibers result in exceptional dielectric constant uniformity.

The dielectric constant of RT/duroid 5870 laminates is uniform from panel to panel and is constant over a wide frequency range.

Its low dissipation factor extends the usefulness of RT/duroid 5870 laminates to Ku-band and above.

Normally supplied as a laminate with electrodeposited copper of ½ to 2 ounces/ft² (8 to 70μm) or reverse treated EDC on both sides, RT/duroid 5870 composites can also be clad with rolled copper foil for more critical electrical applications. Cladding with aluminum, copper or brass plate may also be specified.

When ordering RT/duroid 5870 laminates, it is important to specify dielectric thickness, tolerance, rolled, electrodeposited or reverse treated copper foil, and weight of copper foil required.

13.Standard Thicknesses, Panel Sizes & Claddings

Standard Claddings (Electrodeposited Copper Foil)

Additional claddings such as heavy metal, resistive foil and unclad are available

Application areas

  • Dielectric constant of 2.33 with tight tolerance ±0.02 at 10 GHz
  • Dissipation factor of 0.0012 at 10GHz
  • Temperature coefficient of dielectric constant (TCDk) of -115 ppm/°C
  • Low Moisture Absorption of 0.02%
  • CTE in X-axis of 22 ppm/°C, Y-axis of 28 ppm/°C and Z-axis of 173 ppm/°C
  • Isotropic
RT duroid 5870 PCB 10mil Thick
CCL (15) RTduroid 5870

PCB specifications

Base materialRT/duroid 5870
Layer count2 layers
Board dimensions85mm x 36mm = 1PCS, +/- 0.15mm
Minimum Trace/Space5/6 mils
Minimum Hole Size0.4mm
Blind viasNo
Finished board thickness0.3mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
Surface finishElectroless Nickel Immersion Gold (ENIG)
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com