Rogers RO4003C LoPro 2-Layer 16.7mil Low-Loss PCB with ENEPIG Finish
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- MOQ
- 1PCS
- Lead time
- 5-9 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
RO4003C LoPro laminates use a proprietary Rogers' technology that allows reverse treated foil to bond to standard RO4003C dielectric. This results in a laminate with low conductor loss for improved insertion loss and signal integrity while maintaining the other desirable attributes of the standard RO4003C laminate system. RO4003C hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes and do not require specialized via preparation such as sodium etch for lower manufacturing cost.
Dielectric constant of 3.38 +/- 0.05 at 10 GHz/23°C Dissipation factor of 0.0027 at 10 GHz/23°C Td > 425°C, High Tg greater than 280°C TMA High Thermal Conductivity of 0.64 W/mK Low Z-axis coefficient of thermal expansion at 46 ppm/°C Copper matched Coefficient of Thermal Expansion (-55 to 288°C): X axis 11 ppm/°C, Y axis 14 ppm/°C Lead free Process Compatible
Lower insertion loss allows for higher operating frequency designs (even greater than 40 GHz) Reduced passive inter-modulation (PIM) for base station antennas Improved thermal performance due to lower conductor loss Multilayer PCB capability Design flexibility High temperature processing compatibility Meets environmental concerns CAF resistant Standard epoxy/glass (FR-4) fabrication processes without specialized via preparation
Copper layer 1 – 35 μm Rogers RO4003C LoPro Substrate – 0.424 mm (16.7mil) Copper layer 2 – 35 μm
Components: 56 Total Pads: 102 Thru Hole Pads: 75 Top SMT Pads: 27 Bottom SMT Pads: 0 Vias: 49 Nets: 2
Digital applications such as servers, routers, and high speed back planes Cellular base station antennas and power amplifiers LNB's for direct broadcast satellites RF Identification Tags
Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
