BICHENGPCBBicheng Technologies Limited

Rogers RO4003C 2-Layer 8mil RF High-Frequency PCB with Immersion Silver

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers RO4003C materials are proprietary woven glass reinforced hydrocarbon/ceramics with the electrical performance of PTFE/woven glass and the manufacturability of epoxy/glass.

Offered in various configurations, RO4003C laminates utilize both 1080 and 1674 glass fabric styles with all configurations meeting the same laminate electrical performance specification. RO4003C laminates provide tight control on dielectric constant (Dk) and low loss while utilizing the same processing method as standard epoxy/glass but at a fraction of the cost of conventional microwave laminates. Unlike PTFE based microwave materials, no special through-hole treatments or handling procedures are required.

RO4003C materials are non-brominated and are not UL 94 V-0 rated.

RO4003C material's thermal coefficient of expansion (CTE) provides several key benefits to the circuit designer. The expansion coefficient of RO4003C material is similar to that of copper which allows the material to exhibit excellent dimensional stability, a property needed for mixed dielectric multi-layer boards constructions. The low Z-axis CTE of RO4003C laminates provides reliable plated through-hole quality, even in severe thermal shock applications. RO4003C material has a Tg of >280°C (536°F) so its expansion characteristics remain stable over the entire range of circuit processing temperatures.

Dielectric Constant of DK 3.38 +/-0.05 at 10GHz Dissipation Factor of 0.0027 at 10GHz, 0.0021 at 2.5GHz Thermal Coefficient of dielectric constant of +40 ppm/°C Thermal Conductivity 0.71 W/m/°K X axis CTE of 11ppm/°C, Y CTE of 14ppm/°C, Z CTE of 46ppm/°C Low moisture absorption of 0.06%

Ideal for multi-layer board (MLB) constructions Processes like FR-4 at lower fabrication cost Designed for performance sensitive, high volume applications Competitively priced

Copper layer 1 – 35 µm Rogers RO4003C Core – 0.203 mm (8mil) Copper layer 2 – 35 µm

Components: 14 Total Pads: 22 Thru Hole Pads: 12 Top SMT Pads: 10 Bottom SMT Pads: 0 Vias: 19 Nets: 2

Cellular Base Station Antennas and Power Amplifiers RF Identification Tags Automotive Radar and Sensors LNB's for Direct Broadcast Satellites

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

Rogers RO4003C PCB

PCB specifications

Base MaterialRO4003C
Layer Count2-layer
Board Dimensions54mm × 58mm (±0.15mm)
Minimum Trace/Space4/6 mils
Minimum Hole Size0.2mm
Blind ViasNo
Finished Board Thickness0.3mm
Finished Cu Weight (Outer Layers)1oz (1.4 mils)
Via Plating Thickness20 µm
Surface FinishImmersion Silver
Top SilkscreenBlack
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com