BICHENGPCBBicheng Technologies Limited

RO4003C 2-Layer ENIG PCB – High-Frequency RF Board for 5G & Automotive Radar

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers RO4003C is a high-performance woven glass-reinforced hydrocarbon/ceramic laminate that combines the electrical properties of PTFE with the cost-effective manufacturability of epoxy/glass. Designed for RF and microwave applications, it offers tight dielectric constant (Dk) control, low loss, and thermal stability without requiring specialized processing like PTFE-based materials.

Key advantages of RO4003C include: CTE matched to copper for dimensional stability in multi-layer PCBs. High Tg (>280°C) for reliability in extreme thermal conditions. Low moisture absorption (0.06%) and consistent performance across frequencies.

Dielectric Constant (Dk): 3.38 ±0.05 @ 10GHz Dissipation Factor: 0.0027 @ 10GHz (ultra-low loss) Thermal Conductivity: 0.71 W/m/°K CTE: X/Y/Z = 11/14/46 ppm/°C (prevents via cracking) Surface Finish: Electroless Nickel Immersion Gold (ENIG) for corrosion resistance.

Copper layer 1 - 35 μmRogers 4003C Core - 1.524 mm (60mil)Copper layer 2 - 35 μm

Components: 92Total Pads: 227Thru Hole Pads: 171Top SMT Pads: 56Bottom SMT Pads: 0Vias: 48Nets: 2

Artwork Format: Gerber RS-274-XQuality Standard: IPC-Class 2Availability: Worldwide shipping

Ideal for multi-layer board (MLB) constructionsProcesses like FR-4 at lower fabrication costDesigned for performance sensitive, high volume applicationsCompetitively priced

5G & Cellular Base Stations (antennas, power amplifiers).Automotive Radar/Sensors (ADAS, mmWave).Satellite Communication (LNBs, RF tags).

PCB specifications

Base MaterialRO4003C
Layer CountDouble sided
Board Dimensions580mm x 410mm (1 PCS) +/- 0.15mm
Minimum Trace/Space6/10 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness1.6mm
Finished Cu Weight1oz (1.4 mils) outer layers
Via Plating Thickness20 μm
Surface FinishElectroless Nickel Immersion Gold
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% Electrical test prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com