BICHENGPCBBicheng Technologies Limited

Rogers CuClad 250 2-Layer 10mil Immersion Gold PCB – High Frequency Microwave Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

MOQ
1PCS
Lead time
7-13 working days
Packaging
Vacuum / Anti-static Packaging
Payment
T/T, Paypal

Brief introduction

1. Introduction to Rogers CuClad 250 PCB

Rogers CuClad 250 laminates are cross plied, woven fiberglass and PTFE composite laminates that offer low dielectric constants ranging from 2.40 to 2.55 at 10GHz. CuClad 250 laminates use a higher fiberglass/PTFE ratio to provide mechanical properties approaching those of conventional substrates. These laminates provide better dimensional stability and lower thermal expansion in all directions.

CuClad 250 laminates feature cross-plied construction (alternating layers of coated fiberglass plies oriented 90° to each other) which provides true electrical and mechanical isotropy in the XY plane. This 2-layer rigid PCB is constructed entirely with CuClad 250 as the core material, making it ideal for radars, microwave components (LNAs, filters, couplers), and electronic countermeasure systems.

2. Key Features of Rogers CuClad 250 PCB

Dielectric Constant: 2.40 to 2.55 at 10 GHz / 1MHz

Low outgassing: TML 0.01%, CVCM 0.0%, WVR 0.0%

Cross Plied Woven Fiberglass construction

Balanced electrical and mechanical properties

Better Dk uniformity than non-woven fiberglass reinforced laminates

Cross-plied construction provides balanced electrical and mechanical properties

Low Dk supports wider line widths for lower insertion loss

Better dielectric constant uniformity than comparable non-woven fiberglass reinforced laminates

Excellent dimensional stability and lower thermal expansion in all directions

True electrical and mechanical isotropy in the XY plane

5. PCB Stackup (2-Layer Rigid Structure)

Rogers CuClad 250 Core – 0.254 mm (10mil)

Total thickness: 0.4mm (including copper layers)

7. Rogers CuClad 250 Material – Product Introduction

CuClad® series laminates are woven fiberglass/PTFE composite materials for use as printed circuit board substrates. Using precision control of the fiberglass/PTFE ratio, CuClad laminates offer a range of choices from the lowest dielectric constant and loss tangent to a more highly reinforced laminate with better dimensional stability.

The woven fiberglass reinforcement in CuClad products provides greater dimensional stability than non-woven fiber glass reinforced PTFE based laminates of similar dielectric constants. The consistency and control of the PTFE coated fiberglass cloth allows Rogers to offer a greater variety of dielectric constants and produces a laminate with better dielectric constant uniformity than comparable non-woven fiberglass reinforced laminates. These properties make CuClad an attractive choice for filters, couplers and low noise amplifiers.

CuClad laminates are crossplied (alternating layers of coated fiberglass plies are oriented 90° to each other). This provides true electrical and mechanical isotropy in the XY plane, a feature unique to CuClad laminates. No other woven or nonwoven fiberglass reinforced PTFE based laminates make this claim.

9. CuClad 250 Typical Properties (Data Sheet)

Radars, Electronic Countermeasures, Electronic Support Measures

Microwave Components (LNAs, filters, couplers, etc.)

Type of artwork supplied: Gerber RS-274-X

12. Standard Thicknesses, Panel Sizes & Claddings

Application areas

  • Dielectric Constant: 2.40 to 2.55 at 10 GHz / 1MHz
  • Dissipation Factor: 0.0017 at 10 GHz
  • Low Moisture Absorption: 0.03%
  • Strong Peel Strength: 14 lbs/in
  • Low outgassing: TML 0.01%, CVCM 0.0%, WVR 0.0%
  • Cross Plied Woven Fiberglass construction
  • High PTFE to Glass Ratio
  • Balanced electrical and mechanical properties
  • Better Dk uniformity than non-woven fiberglass reinforced laminates
  • Low circuit losses at high frequency
Rogers CuClad 250 2-Layer Immersion Gold PCB
CuClad 250 Material

PCB specifications

Base materialRogers CuClad 250 (PTFE/woven fiberglass composite)
Layer count2-layer rigid
Board dimensions48.6mm x 76.9mm = 1 PCS, ±0.15mm
Minimum Trace/Space4/6 mils
Minimum Hole Size0.3mm
Blind viasNo
Finished board thickness0.4mm (10mil core)
Finished Cu weight1 oz (35 μm / 1.4 mils) outer layers
Via plating thickness20 μm
Surface finishImmersion Gold
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskBlue
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com