BICHENGPCBBicheng Technologies Limited

RF-30 High Frequency PCB 2-Layer Antenna Board with Immersion Tin Finish

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

RF-30 is an organic ceramic laminate that combines woven glass reinforced fluoropolymer chemistry with ceramic enhancements. Designed as the best value solution, it meets the low-cost, high-performance demands of microwave and radio frequency antenna applications.

The material's low dissipation factor, thermal stability and smooth surface profile minimize phase shift with frequency/temperature variations, delivering exceptionally low intermodulation performance. RF-30 is particularly suitable for large printed circuit base station antennas up to 102 inches.

With excellent peel strength for high-temperature assembly and power handling requirements, RF-30 maintains dimensional stability through its woven fabric design. The laminate meets UL-94V0 flammability standards.

Dielectric Constant: 3.0 ±0.05 at 1.9GHz Dissipation Factor: 0.0014 at 1.9GHz CTE: x=11 ppm/°C, y=21 ppm/°C, z=125 ppm/°C Moisture Absorption: 0.02% Dielectric Breakdown: >60kV Volume Resistivity: 1.26×109 Mohm-cm Flammability Rating: UL-94V0

Top Layer: 35μm copperCore: 1.016mm (40mil) RF-30Bottom Layer: 35μm copper

Components: 77Total Pads: 186 (93 thru-hole, 93 SMT)Vias: 121Nets: 2

Artwork Format: Gerber RS-274-XQuality Standard: IPC-Class 2Via Types: Through-hole only (no blind vias)Availability: Worldwide shipping

Cost-effective RF solutionExcellent peel strengthUltra-low dissipation factorSuperior intermodulation performanceMinimal moisture absorptionEnhanced surface smoothness

Antenna and subcomponentsRF passive componentsPower amplifiersBase station antennasMicrowave circuits

PCB specifications

Base MaterialRF-30
Board Dimensions151mm×82mm (±0.15mm)
Minimum Trace/Space5/4 mils
Minimum Hole Size0.3mm
Finished Thickness1.1mm
Copper Weight1oz (35μm) outer layers
Via Plating Thickness20μm
Surface FinishImmersion Tin
Solder MaskNone
Silkscreen (Top)Black
Electrical Test100% tested

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com