Hybrid PCB on RO4003C and S1000-2M 6-Layer 1.1mm Thick Low Loss Material for Microstrip and Stripline Circuits
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers RO4003C materials are proprietary woven glass-reinforced hydrocarbon/ceramics, combining the electrical performance of PTFE/woven glass with the manufacturability of epoxy/glass. This design aims to deliver superior high-frequency performance while maintaining cost-effective circuit fabrication. Consequently, RO4003C is a low-loss material that can be processed using standard epoxy/glass (FR-4) techniques at competitive prices.
RO4003C possesses essential properties for RF microwave circuit designers, matching networks, and controlled impedance transmission lines. Its low dielectric loss makes it suitable for applications where higher operating frequencies restrict the use of conventional circuit board laminates.
Available in various configurations, RO4003C laminates utilize both 1080 and 1674 glass fabric styles, all meeting the same laminate electrical performance specifications. Notably, RO4003C materials are non-brominated and are not rated UL 94 V-0.
Dielectric Constant: DK 3.38 ± 0.05 at 10GHz Dissipation Factor: 0.0027 at 10GHz Thermal Conductivity: 0.71 W/m/°K Thermal Coefficient of Dielectric Constant: +40 ppm/°C (ranging from -50°C to 150°C) Coefficient of Thermal Expansion (CTE) matched to copper: X-axis 11 ppm/°C, Y-axis 14 ppm/°C Low Z-axis CTE: 46 ppm/°C Glass Transition Temperature (Tg): >280 °C Low Moisture Absorption: 0.06%
Lower Z-axis CTE for improved through-hole reliability Excellent mechanical processability and thermal resistance Lead-free compatible Tg: 180°C (DSC), compatible with UV blocking/AOI High heat resistance Excellent anti-CAF performance Low water absorption
Copper Layer 1: 35 µmRO4003C: 0.305 mm (12 mil)Copper Layer 2: 35 µmPrepreg: 1080 RC63% 0.0644 mm (2.5 mil)Copper Layer 3: 35 µmS1000-2M: 0.203 mm (3 mil)Copper Layer 4: 35 µmPrepreg: 1080 RC63% 0.0644 mm (2.5 mil)Copper Layer 5: 35 µmRO4003C: 0.305 mm (12 mil)Copper Layer 6: 35 µm
Components: 22Total Pads: 39Through Hole Pads: 21Top SMT Pads: 18Bottom SMT Pads: 0Vias: 21Nets: 5
Commercial Airline Broadband AntennasMicrostrip and Stripline CircuitsMillimeter Wave ApplicationsRadar SystemsGuidance SystemsPoint-to-Point Digital Radio Antennas
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
