BICHENGPCBBicheng Technologies Limited

AGC RF-10 2-Layer 0.5mm ENEPIG PCB – Microstrip Patch & GPS Antenna

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

MOQ
1PCS
Lead time
7-10 working days
Packaging
Vacuum / Anti-static Packaging
Payment
T/T, Paypal

Brief introduction

AGC RF-10 copper clad laminates are composites of ceramic-filled PTFE and woven fiberglass, engineered for high-power RF applications. RF-10 offers the advantage of a high dielectric constant (Dk) and low dissipation factor, enabling significant size reduction in RF circuits. The thin woven fiberglass reinforcement provides both low dielectric loss and improved rigidity, facilitating ease of handling and enhanced dimensional stability for multilayer circuits.

AGC RF-10 laminates are designed to provide a cost-effective substrate with industry-acceptable delivery times. They bond well to smooth, low-profile copper, and the combination of low dissipation factor and very smooth copper results in optimal insertion losses at higher frequencies where skin effect losses are substantial.

This 2-layer rigid PCB is constructed entirely with AGC RF-10 as the core material, making it ideal for demanding RF antenna and passive component applications.

High dielectric constant (Dk = 10.2 ± 0.3 at 10 GHz)

Low dissipation factor (Df = 0.0025 at 10 GHz)

High thermal conductivity (0.85 W/m·K, unclad)

X-axis CTE: 16 ppm/°C, Y-axis CTE: 20 ppm/°C, Z-axis CTE: 25 ppm/°C

High Dk enables RF circuit size reduction

High thermal conductivity for enhanced thermal management

Excellent adhesion to smooth copper foils

Low X, Y, Z expansion for plated through-hole reliability

5. PCB Stackup (2-Layer Rigid Structure)

Passive components (filters, couplers, power dividers)

Type of artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-3 Availability: Worldwide

9. AGC RF-10 Low-Loss Ceramic-Filled PTFE – Product Introduction

AGC RF-10 laminates are ceramic-filled PTFE composites reinforced with woven fiberglass. They are optimized for high-frequency, high-power RF applications requiring high dielectric constant and low signal loss. The thin woven glass reinforcement ensures mechanical rigidity and dimensional stability, while the ceramic filler provides a stable Dk and low dissipation factor.

AGC RF-10 can be sheared, drilled, milled, and plated using standard PTFE circuit board processing techniques. Its low Z-axis expansion enhances plated through-hole reliability and reduces scaling factors for artwork compensation.

Microstrip patch antennas GPS antennas Passive components (filters, couplers, power dividers) Aircraft collision avoidance systems Satellite components

13. Standard Thicknesses, Panel Sizes & Claddings

AGC RF-10 2-Layer ENEPIG PCB
CCL 133 RF-10

PCB specifications

Base materialAGC RF-10
Layer countDouble sided
Board dimensions143.6mm x 109.8mm = 2 Types = 2 PCS, ±0.15mm
Minimum Trace / Space5 / 7 mils
Minimum Hole Size0.4mm
Blind viasNo
Finished board thickness0.5mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
Surface finishENEPIG
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com