Laminate data sheet
RO3010
17 parameters from the manufacturer data sheet. Values are for reference; the confirmed specification governs.
Properties
| Property | Value | Unit | Direction | Condition | Test method |
|---|---|---|---|---|---|
| Dielectric Constant, ε Process | 10.2 ± 0.05 | - | Z | 10 GHz/23℃ | IPC-TM-650 2.5.5.5 Clamped Stripline |
| Dielectric Constant, ε Design | 11.2 | - | Z | 8GHz to 40 GHz | Differential Phase Length Method |
| Dissipation Factor, tan δ | 0.0022 | - | Z | 10 GHz/23℃ | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of ε | -395 | ppm/℃ | Z | 10 GHz -50℃ to 150℃ | IPC-TM-650 2.5.5.5 |
| Dimensional Stability | 0.35 / 0.31 | mm/m | X / Y | COND A | IPC-TM-650 2.2.4 |
| Volume Resistivity | 10⁵ | MΩ.cm | - | COND A | IPC 2.5.17.1 |
| Surface Resistivity | 10⁵ | MΩ | - | COND A | IPC 2.5.17.1 |
| Tensile Modulus | 1902 / 1934 | MPa | X / Y | 23℃ | ASTM D 638 |
| Moisture Absorption | 0.05 | % | - | D48/50 | IPC-TM-650 2.6.2.1 |
| Specific Heat | 0.8 | j/g/k | - | - | Calculated |
| Thermal Conductivity | 0.95 | W/M/K | - | 50℃ | ASTM D 5470 |
| Coefficient of Thermal Expansion (-55 to 288℃) | 13 / 11 / 16 | ppm/℃ | X / Y / Z | 23℃/50% RH | IPC-TM-650 2.4.4.1 |
| Td | 500 | ℃ TGA | - | - | ASTM D 3850 |
| Density | 2.8 | gm/cm³ | - | 23℃ | ASTM D 792 |
| Copper Peel Strength | 9.4 | lb/in. | - | 1oz, EDC After Solder Float | IPC-TM 2.4.8 |
| Flammability | V-0 | - | - | - | UL 94 |
| Lead-free Process Compatible | Yes | - | - | - | - |
Boards built on this laminate
Rogers 3010 PCB RO3010 High Frequency PCB With 5mil/10mil/25mil and 50mil Coating Immersion Silver, Gold, Tin and HASL
Rogers RO3010 Microwave PCB Board 2-Layer Rogers 3010 25mil 0.635mm Circuit Board DK10.2 DF 0.0022 High Frequency PCB
Rogers RO3010 RF Printed Circuit Board 2-Layer Rogers 3010 50mil 1.27mm Microwave PCB with Immersion Silver
Rogers 3010 PCB RO3010 High Frequency PCB With 5mil, 10mil, 25mil and 50mil Coating Immersion Silver, Gold, Tin and HASL
Need a quote for this laminate?
Send us your Gerber, layer count and quantity — you get a DFM note and an indicative price within 4 working hours.
Get a quote