Laminate data sheet
RO3003
13 parameters from the manufacturer data sheet. Values are for reference; the confirmed specification governs.
Properties
| Property | Value | Unit | Direction | Condition | Test method |
|---|---|---|---|---|---|
| Dielectric Constant, εProcess | 3.0±0.04 | — | Z | 10 GHz/23℃ | IPC-TM-650 2.5.5.5 Clamped Stripline |
| Dielectric Constant, εDesign | 3 | — | Z | 8GHz to 40 GHz | Differential Phase Length Method |
| Dissipation Factor, tanδ | 0.001 | — | Z | 10 GHz/23℃ | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 107 | MΩ.cm | — | COND A | IPC 2.5.17.1 |
| Surface Resistivity | 107 | MΩ | — | COND A | IPC 2.5.17.1 |
| Td | 500 | ℃ TGA | — | — | ASTM D 3850 |
| Coefficient of Thermal Expansion (-55 to 288℃) | 171625 | ppm/℃ | XYZ | 23℃/50% RH | IPC-TM-650 2.4.4.1 |
| Thermal Conductivity | 0.5 | W/M/K | — | 50℃ | ASTM D 5470 |
| Copper Peel Strength | 12.7 | lb/in | — | 1oz,EDC After Solder Float | IPC-TM 2.4.8 |
| Flammability | V-0 | — | — | — | UL 94 |
| Moisture Absorption | 0.04 | % | — | D48/50 | IPC-TM-650 2.6.2.1 |
| Density | 2.1 | gm/cm3 | — | 23℃ | ASTM D 792 |
| Lead-free Process Compatible | Yes | — | — | — | — |
Boards built on this laminate
3 Layer Hybrid High Frequency PCB RO3003 RO3210 Material 3mm Thick for Automotive Radar and 5G Applications
High-Performance RO3003 HDI PCB 4-Layer 1.6mm Thick Circuit Boards for Advanced Applications
High-Performance RO3003 4-Layer HDI PCB 2.4mm Thick Circuit Boards for Advanced Applications
Rogers RO3003 High Frequency Printed Circuit Board - DK3.0 GPS Antenna RF PCB with Immersion Gold
Rogers RO3003 High Frequency PCB 2-Layer Rogers 3003 10mil Circuit Board | DK3.0 | DF 0.001 Microwave PCB
Rogers RO3003 Microwave PCB 2-Layer Rogers 3003 20mil Circuit Board DK3.0 DF 0.001 High Frequency PCB
Rogers RO3003 High Frequency Printed Circuit Board 2-Layer Rogers 3003 30mil 0.762mm PCB with DK3.0 DF 0.001
Rogers RO3003 RF Printed Circuit Board 2-Layer Rogers 3003 60mil 1.524mm PCB with Low DK3.0 and Low DF 0.001
Need a quote for this laminate?
Send us your Gerber, layer count and quantity — you get a DFM note and an indicative price within 4 working hours.
Get a quote