F4BTMS265 高频电路板 0.8mm 基板、1oz 铜厚、沉金与黑色阻焊
(PCB's are custom-made products, the picture and parameters shown are just for reference)
产品简介
This is a double-sided PCB featuring two layers of copper and designed exclusively for surface mount components. The PCB measures 120mm x 65mm and utilizes a single piece in the panel. It starts with 17 µm (0.5 oz) copper plating on both the top and bottom layers. The core material, F4BTMS265, has a thickness of 0.762 mm and is positioned in the center. The surface finish is immersion gold, and the solder mask on the top layer is black.
产品图片
规格参数
F4BTMS265 High Frequency PCB 0.8mm Substrates 1oz Copper With Immersion Gold and Black Solder Mask
| PCB SIZE | 120 x 65mm = 1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | NO |
| Minimum Trace and Space: | 5 mil / 5 mil |
| Minimum / Maximum Holes: | 0.35 mm / 0.6 mm |
| Number of Drill Holes: | 81 |
| Number of Milled Slots: | 1 |
| Surface Finish | Immersion Gold |
| Solder Mask Color: | Black (Top) |
| Final foil external: | 1 oz |
| Final height of PCB: | 0.8 mm ±10% |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally |
叠层结构
- copper - 17um(0.5 oz)+plate TOP layer
- F4BTMS265 - 0.762mm
- copper - 17um(0.5 oz)+plate BOT Layer
应用领域
- Aerospace equipment
- Space and cabin equipment
- Microwave and radio frequency applications
- Radar and military radar systems
- Feed networks
- Phase-sensitive and phased array antennas
- Satellite communications
材料参数
F4BTMS265 Typical Properties
| Property | F4BTMS265 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Typical), 10 GHz | 2.65 | — | — | 10 GHz | — |
| Dk Tolerance | ±0.04 | — | — | — | — |
| Dissipation Factor, 10 GHz | 0.0012 | — | — | 10 GHz | — |
| Dissipation Factor, 20 GHz | 0.0014 | — | — | 20 GHz | — |
| Thermal Coefficient of Dk | -88 | — | ppm/°C | -55 to 150°C | — |
| Peel Strength (1oz RTF) | >1.8 | — | N/mm | 1 oz RTF copper | — |
| Volume Resistivity | ≥1×10⁸ | — | MΩ·cm | Room temp | — |
| Dielectric Strength (Z) | >34 | — | kV/mm | — | — |
| Dielectric Breakdown (X/Y) | >42 | — | kV | — | — |
| CTE (X, Y) | 15, 20 | X,Y | ppm/°C | -55 to 288°C | — |
| CTE (Z) | 72 | Z | ppm/°C | -55 to 288°C | — |
| Moisture Absorption | 0.025 | — | % | 20±2°C, 24 hrs | — |
| Density | 2.26 | — | g/cm³ | Room temp | — |
| Thermal Conductivity (Z) | 0.36 | Z | W/(m·K) | — | — |
| Flammability | V-0 | — | — | — | UL94 |
F4BTMS 高频材料
The F4BTMS series is an upgraded version of the F4BTM series, featuring significant technological advancements in material formulation and manufacturing processes. This material incorporates a higher concentration of ceramics and utilizes ultra-thin, ultra-fine fiberglass cloth reinforcement, enhancing performance and offering a wider range of dielectric constants. It is suitable for high-reliability applications, particularly in aerospace, and can replace similar foreign products.
By integrating a small amount of ultra-thin fiberglass reinforcement with a uniform mixture of special nanoceramics and polytetrafluoroethylene resin, the F4BTMS series minimizes dielectric loss and enhances dimensional stability. The material exhibits reduced anisotropy in the X/Y/Z directions, allowing for higher frequency usage, increased electrical strength, and improved thermal conductivity. It also has an excellent low coefficient of thermal expansion and stable dielectric temperature characteristics.
The F4BTMS series comes standard with RTF low roughness copper foil, which reduces conductor loss and provides excellent peel strength. It can be paired with either copper-based or aluminum-based options.
注:本页在旧站中保留了不一致的历史字段,新版已按页面实际内容修正,待人工复核。
