BICHENGPCBBicheng Technologies Limited

F4BTMS1000 高频电路板 高 DK10.2 PTFE 3.2mm 基板,沉金

(PCB's are custom-made products, the picture and parameters shown are just for reference)

产品简介

This double-sided PCB features circuitry on both the top and bottom layers, each with a copper weight of 2 oz. The middle layer consists of an F4BTMS1000 core, measuring 3.175 mm in thickness. The PCB size is 215 mm x 145 mm, with a single unit in the panel. It is equipped with surface mount components and does not include any through-hole components. The surface finish is immersion gold, and a black solder mask is applied to the top side of the PCB. Prior to shipment, a comprehensive 100% electrical test is conducted to ensure functionality and uphold quality standards.

技术特性与优势

  • Small dielectric constant tolerance and good consistency between batches.
  • Ultra-low dielectric loss.
  • Stable dielectric constant and low loss value at operating frequencies within 40 GHz, suitable for phase-sensitive applications.
  • Excellent temperature coefficient of dielectric constant and dielectric loss, maintaining stability between -55°C and 150°C.
  • Excellent radiation resistance; retains stable dielectric and physical properties after irradiation.
  • Low outgassing performance, meeting vacuum exhaust requirements for aerospace applications.
  • Minimal thermal expansion coefficients in the X/Y/Z directions, ensuring dimensional stability and reliability of hole copper connections.
  • Improved thermal conductivity, suitable for high-power applications.
  • Excellent dimensional stability.
  • Low water absorption.

产品图片

F4BTMS1000 PCB detail
F4BTMS1000 PCB

规格参数

F4BTMS1000 High Frequency PCB High DK10.2 PTFE 3.2mm Substrates with Immersion Gold

PCB SIZE215 x 145mm = 1PCS
BOARD TYPEDouble sided PCB
Number of Layers2 layers
Surface Mount ComponentsYES
Through Hole ComponentsNO
Minimum Trace and Space:12 mil / 12 mil
Minimum / Maximum Holes:0.6 mm / 3.0 mm
Number of Drill Holes:36
Number of Milled Slots:1
Surface FinishImmersion Gold
Solder Mask Color:Black (Top)
Final foil external:2 oz
Final height of PCB:3.2 mm ±10%
TEST100% Electrical Test prior shipment
SERVICE AREAWorldwide, Globally

叠层结构

  • copper - 70um(1 oz+plate) TOP layer
  • F4BTMS1000 - 3.175mm
  • copper - 70um(1 oz+plate) BOT Layer

应用领域

  • Aerospace equipment, space and cabin equipment
  • Microwave and RF applications
  • Radar and military radar systems
  • Feed networks
  • Phase-sensitive antennas and phased array antennas
  • Satellite communications, etc.

材料参数

F4BTMS1000 Typical Properties

PropertyF4BTMS1000Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz10.20——10 GHz—
Dk Tolerance±0.20————
Dissipation Factor, 10 GHz0.0023——10 GHz—
Dissipation Factor, 20 GHz———20 GHz—
Thermal Coefficient of Dk-320—ppm/°C-55 to 150°C—
Peel Strength (1oz RTF)>1.2—N/mm1 oz RTF copper—
Volume Resistivity≥1×10⁸—MΩ·cmRoom temp—
Dielectric Strength (Z)>23—kV/mm——
Dielectric Breakdown (X/Y)>42—kV——
CTE (X, Y)16, 18X,Yppm/°C-55 to 288°C—
CTE (Z)32Zppm/°C-55 to 288°C—
Moisture Absorption0.03—%20±2°C, 24 hrs—
Density3.20—g/cm³Room temp—
Thermal Conductivity (Z)0.81ZW/(m·K)——
FlammabilityV-0———UL94

F4BTMS 高频板材

The F4BTMS series is an upgraded version of the F4BTM series. Significant advancements have been made in material formulation and manufacturing processes. This material incorporates a large amount of ceramics and utilizes ultra-thin and ultra-fine fiberglass cloth reinforcement. These enhancements have greatly improved performance, resulting in a wider range of dielectric constants. It is a high-reliability material suitable for aerospace applications and can replace similar foreign products.

By incorporating ultra-thin fiberglass cloth reinforcement and a uniform mixture of special nanoceramics and polytetrafluoroethylene resin, the F4BTMS series minimizes dielectric loss and enhances dimensional stability. The material exhibits reduced anisotropy in the X/Y/Z directions, allowing for higher frequency usage, increased electrical strength, and improved thermal conductivity. It also possesses an excellent low coefficient of thermal expansion and stable dielectric temperature characteristics.

The F4BTMS series comes standard with RTF low roughness copper foil, which reduces conductor loss and provides excellent peel strength. It can be paired with copper-based or aluminum-based options.

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com