BICHENGPCBBicheng Technologies Limited

F4BTMS450 20mil 2 层 HASL 航天级超薄玻璃 PTFE 陶瓷电路板

(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)

产品简介

The F4BTMS series is an upgraded version of the F4BTM series. It has achieved a technological breakthrough in material formulation and manufacturing processes. The material has been enriched with a significant amount of ceramics and reinforced with ultra-thin and ultra-fine glass fiber cloth, resulting in substantial improvements in material performance and a broader range of dielectric constants. It is a high-reliability material suitable for aerospace applications and can replace similar foreign products.

By incorporating a small amount of ultra-thin and ultra-fine glass fiber cloth and a large amount of uniformly distributed special nano-ceramics mixed with polytetrafluoroethylene resin, the negative effects of glass fiber on electromagnetic wave propagation are minimized. This reduces dielectric loss, enhances dimensional stability, and decreases the X/Y/Z anisotropy of the material. It also increases the usable frequency range, improves electrical strength, and enhances thermal conductivity. Additionally, the material exhibits excellent low thermal expansion coefficient and stable dielectric temperature characteristics.

The F4BTMS series comes with RTF low roughness copper foil as a standard feature, which reduces conductor loss and provides excellent peel strength. It can be used with either copper or aluminum bases.

This 2-layer rigid PCB is constructed with F4BTMS450 as the core material at 20mil (0.508mm) thickness, with HASL LF (Lead-Free Hot Air Solder Leveling) surface finish, black top solder mask, white top silkscreen, and 1oz copper on both sides. Its DK of 4.5 and ultra-low loss of 0.0015 make it ideal for demanding aerospace, radar, and satellite communication applications.

The F4BTMS series comes with RTF low roughness copper foil as a standard feature, which reduces conductor loss and provides excellent peel strength. It can be used with either copper or aluminum bases. F4BTMS294 can be paired with embedded 50Ω resistor copper foil to form resistive film boards.

Circuit boards can be processed using standard PTFE sheet technology. The excellent mechanical and physical properties of the sheet make it suitable for multi-layer, high multi-layer, and backplane processing. At the same time, it shows excellent processability in dense hole and fine line processing.

技术特性与优势

  • Dielectric Constant (Dk): 4.5 ± 0.09 at 10GHz
  • Dissipation Factor (Df): 0.0015 at 10GHz; 0.0019 at 20GHz
  • Thermal Conductivity: 0.64 W/(M·K) — Enhanced heat dissipation
  • CTE x-axis: 12 ppm/°C, CTE y-axis: 12 ppm/°C, CTE z-axis: 45 ppm/°C (-55°C to 288°C)
  • Thermal Coefficient of Dk: -58 ppm/°C (-55°C to 150°C)
  • Moisture Absorption: 0.08%
  • Flammability: UL-94 V-0
  • RTF Low Roughness Copper Foil — Reduced conductor loss, excellent peel strength (>1.2 N/mm)
  • Aerospace-Grade Reliability — Radiation resistance, low outgassing, high electrical strength
  • Stable DK and Low Loss up to 40GHz — Suitable for phase-sensitive applications
  • HASL LF Finish — Excellent solderability and cost-effective surface finish
  • Stable DK (4.5 ± 0.09 @ 10GHz) — Consistent impedance control for high-frequency designs
  • Ultra-Low Df (0.0015 @ 10GHz) — Excellent high-frequency performance with minimal signal loss
  • Ultra-Thin & Ultra-Fine Glass Reinforcement — Minimized glass fiber effects on EM wave propagation
  • RTF Low Roughness Copper Foil — Reduced conductor loss, excellent peel strength
  • Low CTE & Dimensional Stability — Reliable plated through holes and dimensional stability
  • Stable Performance up to 40GHz — Consistent dielectric constant and low loss for phase-sensitive applications
  • Enhanced Thermal Conductivity (0.64 W/M·K) — Improved heat dissipation for high-power applications
  • DK 4.5 ± 0.09 @ 10GHz:Stable dielectric constant with excellent batch-to-batch consistency
  • Df 0.0015 @ 10GHz:Ultra-low loss for high-frequency RF and microwave designs
  • Thermal Conductivity 0.64 W/M·K:Enhanced heat dissipation for high-power applications
  • CTE: 12/12/45 ppm/K:Low thermal expansion, reliable plated through holes
  • TCDK: -58 ppm/°C:Stable dielectric constant across temperature (-55°C to 150°C)
  • RTF Low Roughness Copper:Reduced conductor loss, excellent peel strength (>1.2 N/mm)
  • Stable up to 40GHz:Consistent DK and low loss for phase-sensitive applications
  • Radiation resistance & low outgassing:Aerospace-grade reliability, NASA-compliant outgassing
  • UL 94 V-0:Flame retardant for safety compliance

产品图片

F4BTMS450 PCB
F4BTMS450 Material

规格参数

Base materialWangling F4BTMS450 (PTFE + Ultra-Thin Glass + Ceramic)
Layer count2-layer
Board dimensions38.4mm x 56.35mm = 1 PCS, ±0.15mm
Minimum Trace/Space4/6 mils
Minimum Hole Size0.3mm
Blind viasNo
Finished board thickness0.6mm (including copper)
Finished Cu weight1 oz (35 μm / 1.4 mils) all layers
Via plating thickness20 μm
Surface finishHASL LF (Lead-Free Hot Air Solder Leveling)
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskBlack
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment
Dielectric Thickness Range0.254mm(10mil), 0.508mm(20mil), 0.635mm(25mil), 0.762mm(30mil), 0.787mm(30.1mil), 1.016mm(40mil), 1.270mm(50mil), 1.50mm(59mil), 1.524mm(60mil), 1.575mm(62mil), 2.03mm(80mil), 2.54mm(100mil), 3.175mm(125mil), 4.06mm(160mil), 5.08mm(200mil), 6.35mm(250mil) (± tolerance per thickness)
Thickness IncrementsAvailable in 0.127mm (5mil) increments; minimum 0.254mm for F4BTMS450
Standard Panel Sizes305x460mm (12x18"), 460x610mm (18x24"), 610x920mm (24x36")
Standard Copper Cladding0.5oz (18μm), 1oz (35μm) — RTF low roughness copper foil (standard)
DK Value4.5 (F4BTMS450)
Special Options50Ω embedded resistor copper foil, aluminum base, copper base
Aluminum/Copper Base OptionF4BTMS***-AL, F4BTMS***-CU for shielding/heat dissipation
Special SizesContact Wangling for non-standard thicknesses and custom sizes

叠层结构

  • Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)
  • Layer: Dielectric, Material: F4BTMS450 Core, Thickness: 0.508 mm (20mil)
  • Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)

PCB 统计

  • Components: 13
  • Total Pads: 20
  • Thru Hole Pads: 12
  • Top SMT Pads: 8
  • Bottom SMT Pads: 0
  • Vias: 9
  • Nets: 5

应用领域

  • Aerospace equipment, space and cabin equipment
  • Microwave and RF systems
  • Radar and military radar systems
  • Feed networks
  • Phase-sensitive antennas and phased array antennas
  • Satellite communications and base station antennas
  • High-power RF amplifiers and microwave modules
  • Aerospace equipment, space and cabin equipment
  • Microwave and RF systems
  • Radar and military radar systems
  • Feed networks
  • Phase-sensitive antennas and phased array antennas
  • Satellite communications and base station antennas
  • High-power RF amplifiers and microwave modules

材料参数

F4BTMS450 Typical Properties

PropertyF4BTMS450Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz4.50——10 GHz—
Dk Tolerance±0.09————
Dissipation Factor, 10 GHz0.0019——10 GHz—
Dissipation Factor, 20 GHz0.0024——20 GHz—
Thermal Coefficient of Dk-58—ppm/°C-55 to 150°C—
Peel Strength (1oz RTF)>1.2—N/mm1 oz RTF copper—
Volume Resistivity≥1×10⁸—MΩ·cmRoom temp—
Dielectric Strength (Z)>45—kV/mm——
Dielectric Breakdown (X/Y)>54—kV——
CTE (X, Y)12, 12X,Yppm/°C-55 to 288°C—
CTE (Z)45Zppm/°C-55 to 288°C—
Moisture Absorption0.08—%20±2°C, 24 hrs—
Density2.53—g/cm³Room temp—
Thermal Conductivity (Z)0.64ZW/(m·K)——
FlammabilityV-0———UL94

质量保证

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment
  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com