BICHENGPCBBicheng Technologies Limited

WL-CT300 5mil Hydrocarbon Ceramic Composite PCB for Radar & Antenna Applications

(Custom PCBs are tailored products; the images and specifications provided are for reference only.)

Brief introduction

(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)

Wangling's WL-CT300 is an organic polymer ceramic fiberglass cloth-covered copper clad laminate from the thermosetting resin-based high-frequency materials family. The composition of the dielectric layer includes hydrocarbon resin, ceramics, and fiberglass cloth. It exhibits low loss performance, meeting the requirements for high-frequency designs. PCB processing can be carried out using techniques similar to FR4 materials, making it simpler compared to PTFE materials and ensuring better stability and consistency in circuitry. It can be used as a substitute for similar foreign products.

The combination of hydrocarbon resin and composite ceramics provides excellent low loss, high-temperature resistance, and temperature stability characteristics. The series of materials have a stable temperature coefficient of dielectric constant and loss, low thermal expansion coefficient, and a high TG value of above 280°C.

This 2-layer rigid PCB is constructed entirely with WL-CT300 as the core material at 5mil (0.127mm) thickness, with pure gold plating surface finish, black top silkscreen, and 1oz copper on both sides. Its DK of 3.00 offers excellent high-frequency performance, making it ideal for demanding applications such as base station antennas, satellite antennas, automotive radar, power amplifiers, and RF filters.

Organic polymer ceramic fiberglass cloth-covered copper clad laminate WL-CT series are thermosetting resin-based high-frequency materials. The composition of the dielectric layer includes hydrocarbon resin, ceramics, and fiberglass cloth. It exhibits low loss performance, meeting the requirements for high-frequency designs. PCB processing can be carried out using techniques similar to FR4 materials, making it simpler compared to PTFE materials and ensuring better stability and consistency in circuitry. It can be used as a substitute for similar foreign products.

The hydrocarbon resin and composite ceramics provide excellent low loss, high-temperature resistance, and temperature stability characteristics. The series of materials have a stable temperature coefficient of dielectric constant and loss, low thermal expansion coefficient, and a high TG value of above 280°C.

This series offers dielectric constants of 3.00, 3.30, 3.38, 3.48, 4.10, and 6.15. The materials can be paired with ED copper foil or reverse-treated RTF copper foil. RTF copper foil offers excellent PIM performance, reduces conductor loss, and minimizes insertion loss. The RTF copper foil has an increased thickness of 0.018mm (0.7mil) due to adhesive treatment, ensuring superior adhesion.

Technical features & benefits

  • Dielectric Constant (DK): 3.00 at 10 GHz / 23°C
  • Dissipation Factor (Df): 0.0025 at 10GHz
  • Excellent TCDK: 27 ppm/°C
  • High Thermal Conductivity: 0.41 W/MK
  • Low Moisture Absorption: 0.15%
  • CTE matched to copper: X=15 ppm/°C, Y=14 ppm/°C, Z=31 ppm/°C
  • TG > 280°C — maintains dimensional stability at high temperatures
  • Thermosetting resin system — better PCB processability and heat resistance
  • Excellent radiation resistance and low outgassing
  • Low dielectric constant tolerance and low loss
  • Stable DK (3.00 @ 10GHz) — Consistent impedance control for high-frequency designs
  • Low Df (0.0025 @ 10GHz) — Excellent high-frequency performance with minimal signal loss
  • FR4-Compatible Processing — Simpler fabrication compared to PTFE, better stability and consistency
  • High TG (>280°C) — Maintains dimensional stability and copper quality at elevated temperatures
  • CTE Matched to Copper — Reliable plated through holes and dimensional stability
  • Excellent TCDK (27 ppm/°C) — Stable electrical performance across temperature
  • Radiation Resistance & Low Outgassing — Ideal for aerospace and defense applications
  • Pure Gold Plating Finish — Excellent solderability, corrosion resistance, and wire bondability
  • Feature — Benefit
  • DK 3.00 @ 10GHz — Stable dielectric constant for consistent impedance control
  • Df 0.0025 @ 10GHz — Low loss for high-frequency RF and microwave designs
  • TCDK: 27 ppm/°C — Excellent temperature stability, minimal variation
  • CTE: 15/14/31 ppm/K — Matched to copper, high reliability plated through holes
  • Thermal conductivity 0.41 W/m/K — Efficient heat removal for high-power applications
  • FR4-compatible processing — Simpler fabrication, better stability and consistency
  • Pure Gold Plating finish — Excellent solderability, corrosion resistance, wire bondability

Product images

WL-CT300 PCB
WL-CT300 Material

PCB specifications

ItemSpecification
Base materialWangling WL-CT300 (Hydrocarbon + Ceramic + Fiberglass)
Layer count2-layer
Board dimensions66.04mm x 43.18mm = 1 PCS, ±0.15mm
Minimum Trace/Space4/5 mils
Minimum Hole Size0.25mm
Blind viasNo
Finished board thickness0.25mm (5mil core + copper)
Finished Cu weight1 oz (35 μm / 1.4 mils) all layers
Via plating thickness20 μm
Surface finishPure Gold Plating
Top SilkscreenBlack
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment
ParameterOptions
Standard Thickness (ED Copper)5mil (0.127mm), 10mil (0.254mm), 20mil (0.508mm), 30mil (0.762mm), 40mil (1.016mm), 60mil (1.524mm) (± tolerance per thickness)
Standard Thickness (RTF Copper)10.7mil, 20.7mil, 30.7mil, 40.7mil, 60.7mil, 80.7mil (± tolerance per thickness)
Standard Panel Sizes460x610mm (18x24"), 915x1220mm (36x48")
Standard CladdingsED Copper: 0.5oz (18μm), 1oz (35μm); RTF Copper available
DK Options (WL-CT Series)3.00, 3.30, 3.38, 3.48, 4.10, 6.15
Aluminum Base OptionWL-CT***-AL with aluminum base for shielding/heat dissipation

Layer stack-up

Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)

Layer: Dielectric, Material: WL-CT300 Core, Thickness: 0.127 mm (5mil)

Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)

PCB Statistics

Components:36

Total Pads:95

Thru Hole Pads:56

Top SMT Pads:39

Bottom SMT Pads:0

Vias:28

Nets:2

Application areas

  • Base station antennas and satellite antennas
  • Automotive radar, sensors, and navigation systems
  • Power amplifiers and combiners
  • Satellite high-frequency heads and transceivers
  • RF devices and filters
  • WIMAX antennas and distributed antennas
  • Aerospace equipment, space systems, in-cabin equipment
  • Phased array antennas and beamforming networks

Properties

WL-CT300 Typical Properties

PropertyWL-CT300Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz3.00Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design), 10 GHz2.98Z—10 GHz50Ω microstrip line
Dk Tolerance±0.05————
Dissipation Factor, 2 GHz0.0025——2 GHzIPC-TM-650 2.5.5.5
Dissipation Factor, 10 GHz0.0030Z—10 GHzIPC-TM-650 2.5.5.5
Dissipation Factor, 20 GHz0.0036——20 GHz—
Thermal Coefficient of Dk27—ppm/°C-55 to 150°CIPC-TM-650 2.5.5.5
Copper Peel Strength0.85—N/mm1 oz Cu foilIPC-TM-650 2.4.8
Volume Resistivity3×10⁸—MΩ·cmC96/23/95IPC-TM-650 2.5.17.1
Surface Resistance2×10⁸—MΩC96/23/95IPC-TM-650 2.5.17.1
Electrical Strength (Z-direction)28—KV/mm5 kW, 500 V/sIPC-TM-650 2.5.6
Breakdown Voltage (X/Y)35—KV5 kW, 500 V/sIPC-TM-650 2.5.6
CTE (X, Y)15, 14X,Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)31Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Water Absorption0.15—%20±2°C, 24 hIPC-TM-650 2.6.2.1
Density1.57—g/cm³Room tempASTM D792
Thermal Conductivity (Z)0.41ZW/(m·K)—ASTM D5470
PIM (with RTF foil)≤-158—dBc—Typical
FlammabilityV-0———UL 94
Tg>280—°CGeneralDSC
Td (onset)412—°CTGAIPC-TM-650 2.4.24.6

Quality Assurance

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com