BICHENGPCBBicheng Technologies Limited

Taconic TLX-0 DK 2.45 Df 0.0009/0.0012 (0.127–6.35mm) Fiberglass Reinforced PTFE Laminate

Brief introduction

TLX-0 is the low-Dk grade of Taconic's fiberglass-reinforced PTFE family, with Dk 2.45 and Df 0.0009–0.0012. It is available from 0.127mm to 6.35mm and is used for low-layer-count microwave boards where consistent electrical performance and mechanical robustness are both required.

Technical features & benefits

  1. 1.Excellent PIM Values in PCBs: Measured lower than -160 dBc, ensuring superior intermodulation performance.
  2. 2.Excellent Mechanical & Thermal Properties: Fiberglass reinforcement provides strength against vibration, high temperatures, and radiation.
  3. 3.Low and Stable Dielectric Constant (Dk): Dk = 2.45 ±0.04 at 10 GHz for consistent electrical performance.
  4. 4.Dimensionally Stable: Reliable fabrication and assembly with minimal movement.
  5. 5.Low Moisture Absorption: 0.02% moisture absorption maintains electrical properties in humid environments.
  6. 6.Tightly Controlled DK: Ensures repeatable circuit performance across panels and batches.
  7. 7.Low Dissipation Factor (Df): Df of 0.0009 @ 1.9GHz and 0.0012 @ 10GHz for ultra-low signal loss.
  8. 8.UL 94 V-0 Flammability Rating: Meets industry safety standards for flame resistance.
  9. 9.Suitable for Low Layer Count Microwave Designs: Ideal for cost-effective, high-performance RF circuits.

Application areas

  • Antennas: Phased array, patch, and other high-frequency antenna designs.
  • Mixers, Splitters, Filters & Combiners: Passive RF components requiring low loss.
  • Passive Components: General-purpose RF circuits and devices.
  • Radar Systems: Automotive, defense, and weather radar applications.
  • Mobile Communication Infrastructure: Base stations and backhaul equipment.
  • Microwave Test Equipment: Calibration standards and test fixtures.
  • Aerospace & Satellite Systems: Due to low outgassing and radiation resistance.
  • High-Vibration Environments: Space launch, engine modules, and military platforms.
  • Extreme Environment Applications: Warship antennas, altimeters, and industrial sensors.
Taconic TLX-0 Laminate

Typical properties: TLX-0

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
TLX-0
PropertyTest MethodUnitsValue
Dielectric Constant & Loss
Dk @ 10 GHzIPC-650 2.5.5.3—2.45
Df @ 1.9 GHzIPC-650 2.5.5.5.1—0.0009
Df @ 10 GHzIPC-650 2.5.5.5.1—0.0012
Outgassing (per ASTM E 595)
% TML (24 Hr @ 257°F)ASTM E 595%0.06
% CVCM (24 Hr @ 257°F)ASTM E 595%0.00
% WVR (24 Hr @ 257°F)ASTM E 595%0.00
Key Mechanical/Thermal
Moisture AbsorptionIPC-650 2.6.2.1%0.02
Flammability RatingUL 94—V-0
Decomposition Temp. Td (5%)IPC-650 2.4.24.6 (TGA)°C553
CTE (Z-axis, 25-260°C)IPC-650 2.4.41 / ASTM D3386ppm/°C215
Dimensional Stability (MD, After Bake)IPC-650 2.4.39 Sec. 5.4mm/M0.08

Available configurations

  • Designation: TLX-0 with Dk = 2.45 ± 0.04.
  • Dielectric Thickness Range: 0.0050 - 0.250 in (0.127 - 6.35 mm).
  • Very Thin Laminate Option: Notable for being available as a very thin laminate, suitable for coupler-type applications.
  • Copper Claddings: Can be combined with any of AGC's available copper claddings.
  • Surface Optimization: Substrate surface is optimized for superior copper adhesion.
  • Example Part Number: TLX-9-0310-CH/CH - 18" x 24" (457 mm x 610 mm).

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com