BICHENGPCBBicheng Technologies Limited

Taconic CER-10 RF Printed Circuit Board 2-Layer CER-10 62mil 1.58mm PCB with Immersion Gold

(Printed Circuit Boards are custom-made products; the images and specifications shown are for reference only.)

Brief introduction

CER-10 is a high-performance organic-ceramic DK-10 laminate from the Taconic ORCER family. This laminate features a woven glass reinforcement, offering exceptional interlaminar bond strength and excellent solder resistance. Its proprietary formulation results in low moisture absorption and consistent electrical properties.

Technical features & benefits

  • Exceptional interlaminar bond strength
  • Low moisture absorption
  • Enhanced dimensional stability
  • Minimal Z-axis expansion
  • Stable dielectric constant over frequency
  • Increased flexural strength
  • Circuit board miniaturization

Product images

Taconic CER-10 62mil PCB
Taconic CER-10 RF PCB Detailed View

PCB specifications

Taconic CER-10 62mil 1.58mm High Frequency PCB

PCB SIZECustom尺寸 based on design
BOARD TYPEDouble sided PCB
Number of Layers2 layers
Surface FinishImmersion Gold (ENIG)
Base MaterialCER-10, DK10
Finished Thickness1.58 mm ±10%
Finished Copper Weight1 oz
TEST100% Electrical Test prior shipment
SERVICE AREAWorldwide, Globally

Application areas

  • Power amplifiers
  • Filters and couplers
  • Passive components
  • The woven glass reinforcement of CER-10 ensures excellent dimensional stability, enhancing its flexural strength. This DK-10 laminate exhibits low Z-axis expansion (CTE 46 ppm/°C), providing reliable plated-through-hole performance in extreme thermal environments.
  • CER-10 laminates are rated V-0 for flammability and are tested in accordance with IPC-TM 650 standards. Each shipment includes a certificate of conformance with lot-specific data.

Our PCB Capability

PCB Capability (CER-10)

PCB Material:Organic-ceramic Laminate based on Woven Glass Reinforcement
Designation:CER-10
Dielectric constant:10
Layer count:Double Layer, Multilayer, Hybrid PCB
Copper weight:0.5oz (17µm), 1oz (35µm), 2oz (70µm)
PCB thickness:25mil (0.635mm), 30mil(0.762mm), 47mil(1.194mm), 50mil (1.27mm)
PCB size:≤400mm X 500mm
Solder mask:Green, Black, Blue, Yellow, Red etc.
Surface finish:Bare copper, HASL, ENIG, Immersion Silver, Immersion Tin and OSP etc.

Properties

CER-10 Typical Properties

PropertyCER-10Dir.UnitsConditionTest Method
CompositionCeramic Filled PTFE————
Dielectric Constant, Dk @ 10 GHz10.26Z—10 GHzIPC-TM-650 2.5.5.5
Dk Tolerance—————
Dissipation Factor, Df @ 10 GHz—Z—10 GHzIPC-TM-650 2.5.5.5
Moisture Absorption——%—ASTM D570
Thermal Conductivity—ZW/(m·K)——
CTE (X)—Xppm/°C——
CTE (Y)—Yppm/°C——
CTE (Z)—Zppm/°C——
Peel Strength (1 oz Cu)——lbs/in——
FlammabilityV-0———UL94

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com