Rogers TMM3 High Frequency Printed Circuit Board 15mil 30mil 60mil DK3.27 RF PCB With Immersion Gold
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- Material
- Rogers TMM3 (Ceramic/Hydrocarbon/Thermoset) / 15-60mil
- MOQ
- 1PCS
- Lead time
- 7-13 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
Rogers' TMM3 high-frequency laminates are ceramic, hydrocarbon, thermoset polymer composites designed for high PTH reliability in stripline and microstrip applications. TMM3 has a dielectric constant of 3.27 and a dissipation factor of 0.002.
TMM3 features an exceptionally low thermal coefficient of dielectric constant. Its isotropic coefficients of thermal expansion closely match those of copper, resulting in the reliable production of plated-through holes and minimal etch shrinkage. Furthermore, the thermal conductivity of TMM3 is approximately twice that of traditional PTFE/ceramic laminates, facilitating effective heat removal.
Since TMM3 is based on thermoset resins, it does not soften when heated. This allows for wire bonding of component leads to circuit traces without concerns about pad lifting or substrate deformation.
1. Chip Testers2. Dielectric Polarizers and Lenses3. Filters and Couplers4. Global Positioning Systems Antennas5. Patch Antennas6. Power Amplifiers and Combiners7. RF and Microwave Circuitry8. Satellite Communication Systems
PCB specifications
PCB Capability (TMM3)
Typical properties: TMM3
Material-level dielectric and mechanical properties, distinct from the board-level specifications above.
Open the standalone data sheet (printable)| Property | Value | Unit | Direction | Condition | Test method |
|---|---|---|---|---|---|
| Dielectric Constant, ε Process | 3.27±0.032 | -- | Z | IPC-TM-650 2.5.5.5 | — |
| Dielectric Constant, ε Design | 3.45 | - | - | Differential Phase Length Method | — |
| Dissipation Factor (process) | 0.002 | - | Z | IPC-TM-650 2.5.5.5 | — |
| Thermal Coefficient of ε | +37 | ppm/K | - | IPC-TM-650 2.5.5.5 | — |
| Volume Resistivity | 2 x 10⁹ | Mohm.cm | - | ASTM D257 | — |
| Surface Resistivity | 9 x 10⁹ | Mohm | - | ASTM D257 | — |
| CTE - X | 15 | ppm/K | X | ASTM E 831 | — |
| CTE - Y | 15 | ppm/K | Y | ASTM E 831 | — |
| CTE - Z | 23 | ppm/K | Z | ASTM E 831 | — |
| Thermal Conductivity | 0.7 | W/m/K | Z | ASTM C518 | — |
| Moisture Absorption | 0.06-0.12 | % | - | ASTM D570 | — |
| Flammability | V-0 | - | - | UL 94 | — |
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
