BICHENGPCBBicheng Technologies Limited

Rogers RT/duroid 6202 DK2.94 Df0.0015 (0.005-0.060") PTFE Ceramic Laminate

Brief introduction

RT/duroid 6202 is a PTFE/ceramic laminate designed for high-frequency circuit applications. It offers a dielectric constant of 2.94 ±0.04 and a dissipation factor of 0.0015 at 10 GHz. The material provides excellent thermal stability with a thermal coefficient of dielectric constant of +5 ppm/°C, making it ideal for applications requiring consistent electrical performance across a wide temperature range.

Technical features & benefits

  1. 1.Dielectric Constant: 2.94 ±0.04 (for thicknesses ≥0.020")
  2. 2.Note: 0.005" laminates: 3.06 ±0.04
  3. 3.Note: 0.010" and 0.015" laminates: 3.02 ±0.04
  4. 4.Low dissipation factor: 0.0015 @ 10 GHz
  5. 5.Excellent thermal stability: TCDk +5 ppm/°C (-50°C to +150°C)
  6. 6.Very low moisture absorption: 0.04%
  7. 7.High thermal conductivity: 0.68 W/m/K
  8. 8.UL 94 V-0 flammability rating
  9. 9.Lead-free process compatible
  10. 10.Excellent dimensional stability

Application areas

  • Microwave circuits
  • Aerospace and defense systems
  • Satellite communications
  • Phased array antennas
  • High-reliability RF components
  • Military electronics
  • Base station infrastructure
  • Automotive radar systems
Rogers RT/duroid 6202 Laminate

Typical properties: RT/duroid 6202

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
RT/duroid 6202 Typical Properties (Data Sheet)
PropertyTypical ValueDirectionUnitsConditionsTest Method
Electrical Properties
Dielectric Constant εr2.94 ± 0.04 [3]Z-10 GHz/23°CIPC-TM-650, 2.5.5.5
Dissipation Factor, Tan δ0.0015Z-10 GHz/23°CIPC-TM-650, 2.5.5.5
Thermal Coefficient of εr+5Zppm/°C10 GHz, -50 to +150°CIPC-TM-650, 2.5.5.5
Volume Resistivity10⁶ZMΩ·cmAASTM D257
Surface Resistivity10⁹—MΩAASTM D257
Mechanical Properties
Tensile Modulus1007 (146)X, YMPa (kpsi)23°CASTM D638
Ultimate Stress30 (4.3)X, YMPa (kpsi)23°CASTM D638
Ultimate Strain4.9X, Y%23°CASTM D638
Compressive Modulus1035 (150)ZMPa (kpsi)—ASTM D638
Copper Peel Strength9.1 (1.6)—lbs/in (N/mm)—IPC-TM-650 2.4.8
Dimensional Stability0.07X, Ymm/m (mil/inch)after etch + E2/150°CIPC-TM-650, 2.4.39
Thermal Properties
Coefficient of Thermal Expansion15Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
—15Yppm/°C-55 to 288°C—
—30Zppm/°C-55 to 288°C—
Thermal Conductivity0.68—W/m/K80°CASTM C518
Td500—°C—ASTM D3850
Physical Properties
Moisture Absorption0.04—%D23/24, D48/50IPC-TM-650, 2.6.2.1 / ASTM D570
Density2.1—g/cm³—ASTM D792
Specific Heat0.93 (0.22)—J/g/K (BTU/lb/°F)—Calculated
FlammabilityV-0———UL 94
Lead-Free Process CompatibleYES

Available configurations

  • Standard Thicknesses:
  • 0.005" (0.127 mm) +/- 0.0005"
  • 0.020" (0.508 mm) +/- 0.0010"
  • 0.030" (0.762 mm) +/- 0.0010"
  • *Additional non-standard thicknesses available from 0.005" to 0.060" in varying increments*
  • Standard Panel Sizes:
  • 12" x 18" (305 mm x 457 mm)
  • 24" x 18" (610 mm x 457 mm)
  • Additional panel sizes available upon request
  • Standard Claddings:
  • Electrodeposited Copper Foil:
  • ½ oz (18µm) HH/HH
  • 1 oz (35µm) H1/H1
  • Rolled Copper Foil:
  • ½ oz (18µm) 5R/5R
  • 1 oz (35µm) 1R/1R
  • Additional claddings and cladding weights available, such as resistive foil and reverse treated ED

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com