Laminate data sheet
RT/duroid 6202
24 parameters from the manufacturer data sheet. Values are for reference; the confirmed specification governs.
Also known as: RT6202
Properties
| Property | Typical Value | Direction | Units | Conditions | Test Method |
|---|---|---|---|---|---|
| Electrical Properties | |||||
| Dielectric Constant εr | 2.94 ± 0.04 [3] | Z | - | 10 GHz/23°C | IPC-TM-650, 2.5.5.5 |
| Dissipation Factor, Tan δ | 0.0015 | Z | - | 10 GHz/23°C | IPC-TM-650, 2.5.5.5 |
| Thermal Coefficient of εr | +5 | Z | ppm/°C | 10 GHz, -50 to +150°C | IPC-TM-650, 2.5.5.5 |
| Volume Resistivity | 10⁶ | Z | MΩ·cm | A | ASTM D257 |
| Surface Resistivity | 10⁹ | — | MΩ | A | ASTM D257 |
| Mechanical Properties | |||||
| Tensile Modulus | 1007 (146) | X, Y | MPa (kpsi) | 23°C | ASTM D638 |
| Ultimate Stress | 30 (4.3) | X, Y | MPa (kpsi) | 23°C | ASTM D638 |
| Ultimate Strain | 4.9 | X, Y | % | 23°C | ASTM D638 |
| Compressive Modulus | 1035 (150) | Z | MPa (kpsi) | — | ASTM D638 |
| Copper Peel Strength | 9.1 (1.6) | — | lbs/in (N/mm) | — | IPC-TM-650 2.4.8 |
| Dimensional Stability | 0.07 | X, Y | mm/m (mil/inch) | after etch + E2/150°C | IPC-TM-650, 2.4.39 |
| Thermal Properties | |||||
| Coefficient of Thermal Expansion | 15 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| — | 15 | Y | ppm/°C | -55 to 288°C | — |
| — | 30 | Z | ppm/°C | -55 to 288°C | — |
| Thermal Conductivity | 0.68 | — | W/m/K | 80°C | ASTM C518 |
| Td | 500 | — | °C | — | ASTM D3850 |
| Physical Properties | |||||
| Moisture Absorption | 0.04 | — | % | D23/24, D48/50 | IPC-TM-650, 2.6.2.1 / ASTM D570 |
| Density | 2.1 | — | g/cm³ | — | ASTM D792 |
| Specific Heat | 0.93 (0.22) | — | J/g/K (BTU/lb/°F) | — | Calculated |
| Flammability | V-0 | — | — | — | UL 94 |
| Lead-Free Process Compatible | YES | ||||
Boards built on this laminate
Need a quote for this laminate?
Send us your Gerber, layer count and quantity — you get a DFM note and an indicative price within 4 working hours.
Get a quote

