Rogers High Frequency PCB Built on RO4730G3 60mil 1.524mm DK3.0 with Immersion Gold for Cellular Base Station Antennas
(Note: Printed Circuit Boards are custom-made products; the pictures and parameters shown are for reference only.)
Brief introduction
Rogers RO4730G3 antenna-grade laminates provide a reliable and cost-effective alternative to conventional PTFE-based laminates. These materials possess the essential mechanical and electrical properties that antenna designers require. With a dielectric constant of 3.0 and a loss tangent of 0.0022 measured at 2.5 GHz using LoPro Reverse Treated EDC foil, these laminates enable designers to achieve substantial gain while minimizing signal loss. Additionally, they demonstrate low Passive Intermodulation (PIM) performance, with values exceeding -160 dBc.
RO4730G3 materials are compatible with standard epoxy and high-temperature lead-free solder processes. Unlike traditional PTFE-based laminates, they do not require special treatments for plated through hole preparation. Multi-layer configurations can be achieved using RO4450F bondply at 175°C. The resin systems of RO4730G3 are specifically designed to meet the needs of antenna designers, boasting a glass transition temperature that exceeds 280°C. This leads to a low Z-axis Coefficient of Thermal Expansion (CTE), excellent reliability for plated through holes, and superior lead-free solder processability.
This is a double-sided RF PCB constructed from 1.524mm (60mil) RO4730G3, specifically designed for Cellular Base Station Antenna applications.
Product images
PCB specifications
| Basic Specifications | Description |
| Base Material | RO4730G3 60mil (1.524mm) |
| Dielectric Constant | 3.0 ± 0.05 |
| Layer Count | 2 layers |
| Type | Through holes |
| Format | 110mm x 95mm = 1 type = 1 piece |
| Surface Finish | Immersion Gold |
| Copper Weight | Outer layer 35 μm |
| Final PCB Height | 1.6 mm |
| Standard | IPC 6012 Class 2 |
| Packing | 20 pieces per shipment |
| Lead Time | 7 working days |
| Shelf Life | 6 months |
Properties
RO4730G3 Typical Properties
| Property | RO4730G3 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.00 ± 0.05 | Z | — | 10 GHz / 23°C | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 2.98 | Z | — | 1.7–5 GHz | Microstrip |
| Dissipation Factor | 0.0028 | Z | — | 10 GHz / 23°C | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +34 | Z | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 9.0 × 10⁷ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 7.2 × 10⁵ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| CTE (X) | 15.9 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14.4 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 35.2 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Thermal Conductivity | 0.45 | Z | W/(m·K) | 50°C | ASTM D5470 |
| Moisture Absorption | 0.093 | — | % | D48/50 | IPC-TM-650 2.6.2.1 |
| Td | >280 | — | °C | — | — |
| Density | 1.58 | — | g/cm³ | — | ASTM D792 |
| Copper Peel Strength | 4.1 | — | pli | 1 oz LoPro EDC | IPC-TM-650 2.4.8 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Typical application is cellular base station antennas.
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
