BICHENGPCBBicheng Technologies Limited

Rogers 3203 PCB RO3203 High Frequency PCB Double Sided RF Circuit Board For Base Station Infrastructure

(Note: Printed Circuit Boards are custom-made products; the picture and parameters shown are just for reference.)

Brief introduction

The RO3203 High Frequency Circuit Materials from Rogers Corporation are ceramic-filled laminates reinforced with woven fiberglass. These materials are engineered for exceptional electrical performance and mechanical stability while maintaining competitive pricing. Key properties include:

  • Dielectric Constant (DK): 3.02
  • Dissipation Factor (DF): 0.0016
  • Frequency Range: Effective beyond 40 GHz

RO3203 laminates combine the smooth surface of non-woven PTFE laminates, allowing for finer line etching tolerances, with the rigidity of woven-glass PTFE laminates. They can be fabricated into printed circuit boards using standard PTFE processing techniques. Available cladding options include 0.5, 1, or 2 oz./ft² (17, 35, 70 microns thick) of electrodeposited copper foil. All laminates are manufactured under an ISO 9002 certified quality system.

Technical features & benefits

  • Woven Glass Reinforcement: Enhances rigidity for easier handling.
  • Uniform Electrical and Mechanical Performance: Ideal for complex multilayer high-frequency structures.
  • Low Dielectric Loss: Suitable for high-frequency applications exceeding 20 GHz.
  • Excellent Mechanical Properties: Compatible with a wide range of dielectric constants, making it ideal for multilayer board designs.
  • Low In-Plane Expansion Coefficient: Matches copper, suitable for use with epoxy glass multilayer board hybrid designs and reliable surface-mounted assemblies.
  • Dimensional Stability: Provides excellent stability for high production yields.
  • Economically Priced: Cost-effective for volume manufacturing.
  • Surface Smoothness: Facilitates finer line etching tolerances.

Product images

Rogers RO3203 PCB 2-Layer 60mil

PCB specifications

PCB Capability (RO3203)

PCB Material:Ceramic-filled Laminates Reinforced with Woven Fiberglass
Designation:RO3203
Dielectric constant:3.02±0.04
Layer count:Double Layer, Multilayer, Hybrid PCB
Copper weight:0.5oz (17 µm), 1oz (35µm), 2oz (70µm)
PCB thickness:10mil (0.254mm), 20mil (0.508mm), 30mil (0.762mm), 60mil (1.524mm)
PCB size:≤400mm X 500mm
Solder mask:Green, Black, Blue, Yellow, Red etc.
Surface finish:Bare copper, HASL, ENIG, OSP etc.

Application areas

  • Automotive Collision Avoidance Systems
  • Automotive Global Positioning Satellite Antennas
  • Base Station Infrastructure
  • Datalink on Cable Systems
  • Direct Broadcast Satellites
  • LMDS and Wireless Broadband
  • Microstrip Patch Antennas
  • Power Backplanes
  • Remote Meter Readers
  • Wireless Telecommunications Systems

Properties

RO3203 Typical Properties

PropertyRO3203Dir.UnitsConditionTest Method
Dielectric Constant (Process)3.02 ± 0.04Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)3.02Z——Differential Phase Length
Dissipation Factor0.0016Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk-13—ppm/°C-50 to 150°CIPC-TM-650 2.5.5.5
Volume Resistivity10⁷—MΩ·cmCondition AIPC-TM-650 2.5.17.1
Surface Resistivity10⁷—MΩCondition AIPC-TM-650 2.5.17.1
Moisture Absorption0.03—%D48/50ASTM D570
Thermal Conductivity0.48ZW/(m·K)50°CASTM D5470
CTE (X)13Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)13Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)58Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Copper Peel Strength10.2 (1.8)—lbs/in (N/mm)1 oz ED foilIPC-TM-650 2.4.8
Density2.1—g/cm³—ASTM D792
FlammabilityV-0———UL94

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com

Note: This page carried an inconsistent legacy field on the old site. It has been corrected to match the actual page content and is queued for human review.