BICHENGPCBBicheng Technologies Limited

RO4360G2 12mil ENEPIG High Frequency PCB for Base Station Power Amplifiers & Small Cell Transceivers

(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)

Brief introduction

Rogers RO4360G2 laminates are low loss, glass-reinforced, hydrocarbon ceramic-filled thermoset materials that provide the ideal balance of performance and processing capability. RO4360G2 laminates are the first high dielectric constant (Dk) thermoset laminate that can be processed similar to FR-4. These materials are lead-free process capable and offer better rigidity for improved processability in multi-layer board constructions, while reducing material and fabrication costs. RO4360G2 laminates can be paired with RO440 series prepreg and lower-Dk RO4000 laminate in multi-layer designs.

This 2-layer rigid PCB is constructed entirely with RO4360G2 as the core material at 12mil (0.305mm) thickness, with ENEPIG surface finish, green top solder mask, white top silkscreen, and 1oz copper on both sides. Its DK of 6.15 offers excellent high-frequency performance, making it ideal for demanding applications such as base station power amplifiers, small cell transceivers, patch antennas, and ground-based radar.

Rogers RO4360G2 Material – Product Introduction

RO4360G2 laminates are 6.15 Dk, low loss, glass-reinforced, hydrocarbon ceramic-filled thermoset materials that provide the ideal balance of performance and processing ease. RO4360G2 laminates extend Rogers' portfolio of high performance materials by providing customers with a product that is lead-free process capable and offers better rigidity for improved processability in multi-layer board constructions, while reducing material and fabrication costs.

RO4360G2 laminates process similar to FR-4 and are automated assembly compatible. They have a low Z-axis CTE for design flexibility and have the same high Tg as all of the RO4000 product line. RO4360G2 laminates can be paired with RO4400 prepreg and lower-Dk RO4000 laminate in multi-layer designs.

RO4360G2 laminates, with a Dk of 6.15 (Design Dk 6.4), allow designers to reduce circuit dimensions in applications where size and cost are critical. They are the best value choice for engineers working on designs including power amplifiers, patch antennas, ground-based radar, and other general RF applications.

Technical features & benefits

  • Dielectric Constant (DK): 6.15 ± 0.15 at 10GHz/23°C
  • Dissipation Factor (Df): 0.0038 at 10GHz/23°C
  • Td: >407°C, High Tg greater than 280°C TMA
  • High Thermal Conductivity: 0.75 W/mK
  • Low Z-axis Coefficient of Thermal Expansion: 28 ppm/°C
  • Copper Matched Coefficient of Thermal Expansion (-55 to 288°C): X axis 13 ppm/°C, Y axis 14 ppm/°C
  • Lead Free Process Compatible
  • 94V-0 Flammability Rating
  • Processes similar to FR-4
  • Automated assembly compatible
  • Design Flexibility — Low Z-axis CTE for design flexibility
  • Plated Through-Hole Reliability — High reliability for multi-layer board constructions
  • Automated Assembly Compatible — Easy processing similar to FR-4
  • Environmentally Friendly — Lead free process compatible
  • Efficient Supply Chain — Short lead times make for cost effective material option
  • High Thermal Conductivity — Efficient heat removal for power applications
  • High Tg — Same high Tg as all of the RO4000 product line
  • ENEPIG Finish — Excellent solderability, corrosion resistance, and wire bondability
  • DK 6.15 ± 0.15 @ 10GHz:High dielectric constant for reduced circuit dimensions
  • Df 0.0038 @ 10GHz:Low loss for high-frequency RF and microwave designs
  • Td >407°C, Tg >280°C TMA:High thermal stability for demanding environments
  • CTE: 13/14/28 ppm/°C:Copper matched CTE for reliable plated through holes
  • Thermal conductivity 0.75 W/m/K:Efficient heat removal for power applications
  • Processes similar to FR-4:Ease of fabrication and automated assembly compatible
  • Lead free process compatible:Environmentally friendly manufacturing
  • 94V-0 flammability:Safety compliance for electronic equipment
  • ENEPIG finish:Excellent solderability, corrosion resistance, wire bondability

Product images

RO4360G2 PCB
RO4360G2 Material

PCB specifications

Base materialRogers RO4360G2 (Glass-reinforced hydrocarbon ceramic-filled thermoset)
Layer count2 layers
Board dimensions48.9mm x 95.4mm = 1 PCS
Minimum Trace/Space5/7 mils
Minimum Hole Size0.4mm
Blind viasNo
Finished board thickness0.4mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
Surface finishENEPIG
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

Layer stack-up

Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)

Layer: Dielectric, Material: Rogers RO4360G2 Substrate, Thickness: 0.305 mm (12mil)

Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)

PCB Statistics

  • Components: 20
  • Total Pads: 34
  • Thru Hole Pads: 18
  • Top SMT Pads: 16
  • Bottom SMT Pads: 0
  • Vias: 21
  • Nets: 2

Application areas

  • Base Station Power Amplifiers
  • Small Cell Transceivers
  • Patch antennas
  • Ground-based radar
  • General RF applications
  • Power amplifiers and combiners
  • Base Station Power Amplifiers
  • Small Cell Transceivers
  • Patch antennas
  • Ground-based radar
  • General RF applications
  • Power amplifiers and combiners

Properties

RO4360G2 Typical Properties

PropertyRO4360G2Dir.UnitsConditionTest Method
Dielectric Constant (Process)6.15 ± 0.15Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)6.4Z——Microstrip
Dissipation Factor0.0038Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk-131—ppm/°C-50 to 150°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity4 × 10⁷—MΩ·cmCondition AIPC-TM-650 2.5.17.1
Surface Resistivity9 × 10⁶—MΩCondition AIPC-TM-650 2.5.17.1
Moisture Absorption0.08—%D48/50ASTM D570
Thermal Conductivity0.75ZW/(m·K)50°CASTM D5470
CTE (X)13Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)14Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)28Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Copper Peel Strength5.2 (0.91)—lbs/in (N/mm)1 oz ED foilIPC-TM-650 2.4.8
Density2.16—g/cm³—ASTM D792
FlammabilityV-0———UL94
Lead-Free Process CompatibleYes————

Quality Assurance

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment
  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com