BICHENGPCBBicheng Technologies Limited

F4BTMS300 2-Layer 5mil ENIG High Frequency PCB for Aerospace & Radar Applications

(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)

Brief introduction

The F4BTMS series is an upgraded version of the F4BTM series. It has achieved a technological breakthrough in material formulation and manufacturing processes. The material has been enriched with a significant amount of ceramics and reinforced with ultra-thin and ultra-fine glass fiber cloth, resulting in substantial improvements in material performance and a broader range of dielectric constants. It is a high-reliability material suitable for aerospace applications and can replace similar foreign products.

By incorporating a small amount of ultra-thin and ultra-fine glass fiber cloth and a large amount of uniformly distributed special nano-ceramics mixed with polytetrafluoroethylene resin, the negative effects of glass fiber on electromagnetic wave propagation are minimized. This reduces dielectric loss, enhances dimensional stability, and decreases the X/Y/Z anisotropy of the material. It also increases the usable frequency range, improves electrical strength, and enhances thermal conductivity. Additionally, the material exhibits excellent low thermal expansion coefficient and stable dielectric temperature characteristics.

The F4BTMS series comes with RTF low roughness copper foil as a standard feature, which reduces conductor loss and provides excellent peel strength. It can be used with either copper or aluminum bases.

This 2-layer rigid PCB is constructed entirely with F4BTMS300 as the core material at 5mil (0.127mm) thickness, with ENIG surface finish and 1oz RTF copper on both sides. Its DK of 3.00 offers excellent high-frequency performance, making it ideal for demanding applications such as aerospace equipment, microwave, RF, radar, military radar, phased array antennas, and satellite communications.

The F4BTMS series comes with RTF low roughness copper foil as a standard feature, which reduces conductor loss and provides excellent peel strength. It can be used with either copper or aluminum bases. F4BTMS294 can be paired with embedded 50Ω resistor copper foil to form resistor film boards.

PCB processing can follow standard PTFE board process technology. The material's excellent mechanical and physical properties make it suitable for multilayer, high-multilayer, and backplane processing. It also demonstrates excellent processability in dense hole and fine line applications.

F4BTMS300 features a dielectric constant of 3.00±0.04 at 10GHz, ultra-low dissipation factor of 0.0013 at 10GHz, 0.0015 at 20GHz, and 0.0019 at 40GHz, along with excellent thermal stability. The material operates reliably across a wide temperature range from -55°C to +260°C and is suitable for high-reliability aerospace applications.

Technical features & benefits

  • Dielectric Constant (DK): 3.00 ± 0.04 at 10GHz
  • Dissipation Factor (Df): 0.0013 at 10GHz / 0.0015 at 20GHz / 0.0019 at 40GHz
  • Ultra-low TCDK: -20 ppm/°C (-55°C to 150°C)
  • Ultra-low CTE: X-axis 10 ppm/°C, Y-axis 11 ppm/°C, Z-axis 22 ppm/°C (-55°C to 288°C)
  • High Thermal Conductivity: 0.58 W/(M·K)
  • Ultra-Low Moisture Absorption: 0.025%
  • Peel Strength (1oz RTF): >1.2 N/mm
  • Volume Resistivity: ≥1×10⁸ MΩ·cm
  • Surface Resistivity: ≥1×10⁸ MΩ
  • Electrical Strength (Z direction): >40 KV/mm
  • Breakdown Voltage (XY direction): >52 KV
  • Density: 2.28 g/cm³
  • Long-term Operating Temperature: -55°C to +260°C
  • UL 94 V-0 Flammability Rating
  • Excellent radiation resistance — stable dielectric and physical properties after irradiation
  • Low outgassing — meets aerospace vacuum outgassing requirements
  • Excellent dimensional stability
  • Low dielectric constant tolerance and excellent batch-to-batch consistency
  • Stable DK (3.00±0.04) — Consistent impedance control for high-frequency designs
  • Ultra-Low Df (0.0013 @ 10GHz) — Excellent signal integrity with minimal insertion loss
  • Ultra-Low CTE (10/11/22 ppm/°C) — Exceptional dimensional stability, matched to copper
  • High Thermal Conductivity (0.58 W/mK) — Superior heat dissipation for high-power applications
  • Ultra-Thin Glass Fiber Reinforcement — Minimized glass fiber effect, reduced dielectric loss
  • RTF Copper Foil — Reduced conductor loss, excellent peel strength
  • Excellent Radiation Resistance & Low Outgassing — Aerospace-grade for space applications
  • Frequency Stability up to 40GHz — Stable DK and low loss across wide frequency range
  • ENIG Finish — Excellent solderability, corrosion resistance, and wire bondability
  • Low DK tolerance and excellent batch-to-batch consistency:Consistent electrical performance across production batches
  • Ultra-low dielectric loss:Superior signal integrity for high-frequency designs
  • Stable DK and low loss up to 40GHz:Meets phase-sensitive application requirements
  • Excellent frequency and phase stability from -55°C to 150°C:Reliable performance across temperature extremes
  • Ultra-low CTE (10/11/22 ppm/°C):High reliability plated through holes and dimensional stability
  • High thermal conductivity (0.58 W/mK):Suitable for high-power applications
  • Excellent dimensional stability:Consistent performance across varying conditions
  • Ultra-low moisture absorption (0.025%):Stable performance in humid environments
  • ENIG finish:Excellent solderability, corrosion resistance, wire bondability

Product images

F4BTMS300 PCB
F4BTMS300 Material

PCB specifications

Base materialWangling F4BTMS300 (PTFE + Nano-Ceramic + Ultra-Thin Glass + RTF Copper)
Layer count2-layer rigid PCB
Board dimensions66.04mm x 78mm = 1 PCS, ±0.15mm
Minimum Trace/Space4/6 mils
Minimum Hole Size0.35mm
Blind viasNo
Finished board thickness0.25mm
Finished Cu weight1 oz (35 μm / 1.4 mils) all layers
Via plating thickness20 μm
Surface finishENIG
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

Note: F4BTMS300 minimum thickness is 0.127mm (5mil). Multiples of 0.127mm thickness are available.

Standard Dielectric Thicknesses (mm/mil)0.127mm (5mil), 0.254mm (10mil), 0.508mm (20mil), 0.635mm (25mil), 0.762mm (30mil), 0.787mm (30.1mil), 1.016mm (40mil), 1.270mm (50mil), 1.50mm (59mil), 1.524mm (60mil), 1.575mm (62mil), 2.03mm (80mil), 2.54mm (100mil), 3.175mm (125mil), 4.06mm (160mil), 5.08mm (200mil), 6.35mm (250mil)
Thickness Tolerances (mm)0.127mm: ±0.0127, 0.254mm: ±0.02, 0.508mm: ±0.03, 0.635mm: ±0.04, 0.762mm: ±0.04, 0.787mm: ±0.04, 1.016mm: ±0.05, 1.270mm: ±0.05, 1.50mm: ±0.06, 1.524mm: ±0.06, 1.575mm: ±0.06, 2.03mm: ±0.08, 2.54mm: ±0.10, 3.175mm: ±0.13, 4.06mm: ±0.18, 5.08mm: ±0.20, 6.35mm: ±0.25
Standard Panel Sizes305×460mm (12×18"), 460×610mm (18×24"), 610×920mm (24×36")
Standard CladdingsRTF Low-Profile Copper: 0.5oz (18μm), 1oz (35μm); Embedded 50Ω resistor copper foil available
Metal Base OptionsF4BTMS***-AL (Aluminum base), F4BTMS***-CU (Copper base) for shielding/heat dissipation

Layer stack-up

  • Layer: Copper_layer_1 (Top), Material: Copper (RTF), Thickness: 35 μm (1 oz)
  • Layer: Dielectric, Material: F4BTMS300 Core, Thickness: 0.127 mm (5mil)
  • Layer: Copper_layer_2 (Bottom), Material: Copper (RTF), Thickness: 35 μm (1 oz)

PCB Statistics

  • Components: 42
  • Total Pads: 38
  • Thru Hole Pads: 23
  • Top SMT Pads: 15
  • Bottom SMT Pads: 0
  • Vias: 26
  • Nets: 2

Application areas

  • Aerospace equipment, space and cabin equipment
  • Microwave and RF applications
  • Radar and military radar systems
  • Feed networks
  • Phase-sensitive antennas and phased array antennas
  • Satellite communications
  • High-reliability aerospace and defense applications
  • Aerospace equipment, space and cabin equipment
  • Microwave and RF applications
  • Radar and military radar systems
  • Feed networks
  • Phase-sensitive antennas and phased array antennas
  • Satellite communications
  • High-reliability aerospace and defense applications

Properties

F4BTMS300 Typical Properties

PropertyF4BTMS300Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz3.00——10 GHz—
Dk Tolerance±0.04————
Dissipation Factor, 10 GHz0.0013——10 GHz—
Dissipation Factor, 20 GHz0.0015——20 GHz—
Thermal Coefficient of Dk-20—ppm/°C-55 to 150°C—
Peel Strength (1oz RTF)>1.2—N/mm1 oz RTF copper—
Volume Resistivity≥1×10⁸—MΩ·cmRoom temp—
Dielectric Strength (Z)>40—kV/mm——
Dielectric Breakdown (X/Y)>52—kV——
CTE (X, Y)10, 11X,Yppm/°C-55 to 288°C—
CTE (Z)22Zppm/°C-55 to 288°C—
Moisture Absorption0.025—%20±2°C, 24 hrs—
Density2.28—g/cm³Room temp—
Thermal Conductivity (Z)0.58ZW/(m·K)——
FlammabilityV-0———UL94

Quality Assurance

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment
  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

F4BTMS300 Electrical Performance Characteristics

  • Excellent Frequency Stability: The material maintains a stable dielectric constant and low loss values across the 0.5~40GHz frequency range, meeting design requirements across different frequencies.
  • Excellent Temperature Stability: TCDK is approximately -20 ppm/°C over the -55~150°C range, with minimal variation. The actual usable temperature of the material far exceeds this range.

Excellent Frequency Stability: The material maintains a stable dielectric constant and low loss values across the 0.5~40GHz frequency range, meeting design requirements across different frequencies.

Excellent Temperature Stability: TCDK is approximately -20 ppm/°C over the -55~150°C range, with minimal variation. The actual usable temperature of the material far exceeds this range.

F4BTMS Series Aluminum/Copper Base Option

The F4BTMS series can also be provided with an aluminum or copper base, where one side of the dielectric layer is covered with copper foil and the other side is laminated with copper or aluminum for shielding or heat dissipation purposes. Model designation: F4BTMS***-AL or F4BTMS***-CU.

ModelMetal BaseSpecific GravityThermal ConductivityCTEAvailable Metal ThicknessThickness ToleranceAvailable Sizes
F4BTMS***-CUCopper (Purple/Brass)8.9380 W/(M·K)17 ppm/°C0.48, 0.98, 1.48, 1.98, 2.98, 3.98mm (other thicknesses available upon request)+0.02, -0.05460×610mm, 460×305mm
F4BTMS***-ALAluminum2.7180 W/(M·K)24 ppm/°C0.48, 0.98, 1.48, 1.98, 2.98, 3.98mm (other thicknesses available upon request)+0.02, -0.05460×610mm, 460×305mm

Example: F4BTMS300-AL represents F4BTMS300 with aluminum base. F4BTMS300-CU represents F4BTMS300 with copper base.

Data Source Notes

  • Dielectric Constant (Typical) is tested in the Z-direction of the material using GB/T 12636-1990 or IPC-TM-650 2.5.5.5 Stripline method.
  • Dielectric Constant (Design) is tested using the 50Ω Microstrip Line method, also in the Z-direction.
  • Other properties are tested using or referencing IPC-TM-650 or GBT4722-2017 standard test methods.
  • All test data are typical measurement values intended to assist customers in material selection. They do not constitute any express or implied warranty and do not guarantee performance in specific applications. Customers are responsible for verifying the suitability of Wangling materials for each application.

Dielectric Constant (Typical) is tested in the Z-direction of the material using GB/T 12636-1990 or IPC-TM-650 2.5.5.5 Stripline method.

Dielectric Constant (Design) is tested using the 50Ω Microstrip Line method, also in the Z-direction.

Other properties are tested using or referencing IPC-TM-650 or GBT4722-2017 standard test methods.

All test data are typical measurement values intended to assist customers in material selection. They do not constitute any express or implied warranty and do not guarantee performance in specific applications. Customers are responsible for verifying the suitability of Wangling materials for each application.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com