BICHENGPCBBicheng Technologies Limited

F4BTM High Frequency PCB: Advanced Laminates for Superior Performance

(PCB's are custom-made products, the picture and parameters shown are just for reference)

Brief introduction

The F4BTM High Frequency PCB series features advanced laminates crafted from a scientifically formulated blend of fiberglass cloth, nano-ceramic fillers, and polytetrafluoroethylene (PTFE) resin. These materials undergo stringent pressing processes to create a reliable product. Built upon the F4BM dielectric layer, the addition of high-dielectric, low-loss nano-level ceramics results in a laminate with a higher dielectric constant, improved thermal resistance, a lower thermal expansion coefficient, enhanced insulation resistance, and superior thermal conductivity, all while maintaining low loss characteristics.

The F4BTM and F4BTME laminates utilize the same dielectric layer but differ in their copper foil applications: F4BTM is combined with ED copper foil for applications that do not require Passive Intermodulation (PIM) performance, while F4BTME uses reverse-treated (RTF) copper foil, providing excellent PIM characteristics, precise line control, and reduced conductor loss.

Technical features & benefits

  • Dielectric Constant (DK): Available in a range from 2.98 to 3.5.
  • Performance Enhancement: The incorporation of ceramics significantly boosts laminate performance.
  • PIM Excellence: F4BTME demonstrates outstanding passive intermodulation performance.
  • Variety and Cost Efficiency: Available in various thicknesses and sizes, offering cost-effective solutions.
  • Commercial Viability: Suitable for large-scale production, ensuring high cost-effectiveness.
  • Durability: Features radiation resistance and low outgassing properties.

Application areas

  • An example of a DK 3.0 F4BTM PCB is displayed, constructed on a 1.524mm substrate featuring HASL surface finishes.

This PCB type is utilized in a wide range of applications, including:

  • Antennas, Mobile Internet, Sensor Networks, Radar Systems, Millimeter Wave Radar, Aerospace Technologies, Satellite Navigation, Beidou Systems, Missile Guidance, Power Amplifiers, Radio Frequency Applications

Our PCB Capability

PCB Capability (F4BTM)

PCB Material:PTFE / glass fiber cloth / Nano-ceramic filler
Designation (F4BTM)F4BTMDK (10GHz)DF (10 GHz)
F4BTM2982.98±0.060.0018
F4BTM3003.0±0.060.0018
F4BTM3203.2±0.060.0020
F4BTM3503.5±0.070.0025
Layer count:Single Sided, Double Sided, Multilayer, Hybrid
Copper weight:0.5oz, 1oz, 2oz
Dielectric thickness:0.25mm~12.0mm
PCB size:≤400mm X 500mm
Solder mask:Green, Black, Blue, Yellow, Red etc.
Surface finish:Bare copper, HASL, ENIG, Immersion Ag, Immersion Sn, OSP, ENEPIG

Properties

F4BTM298 / F4BTME298 Typical Properties

PropertyF4BTM298 / F4BTME298Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz2.98——10 GHz—
Dk Tolerance±0.06————
Dissipation Factor, 10 GHz0.0018——10 GHz—
Dissipation Factor, 20 GHz0.0023——20 GHz—
Thermal Coefficient of Dk-78—ppm/°C-55 to 150°C—
Peel Strength (F4BTM, 1oz ED)>1.6—N/mm1 oz ED copper—
Peel Strength (F4BTME, 1oz RTF)>1.4—N/mm1 oz RTF copper—
Volume Resistivity≥1×10⁷—MΩ·cmRoom temp—
Surface Resistivity≥1×10⁶—MΩRoom temp—
Dielectric Strength (Z)>26—kV/mm——
Dielectric Breakdown (X/Y)>34—kV——
CTE (X, Y)15, 16X,Yppm/°C-55 to 288°C—
CTE (Z)78Zppm/°C-55 to 288°C—
Moisture Absorption≤0.05—%20±2°C, 24 hrs—
Density2.25—g/cm³Room temp—
Thermal Conductivity (Z)0.42ZW/(m·K)——
PIM (F4BTME only)≤-160—dBc——
FlammabilityV-0———UL94

Final Note on F4BTM Substrates

The F4BTM series can be offered in aluminum-based or copper-based materials, where one side of the dielectric layer is covered with copper foil, and the other side is covered with either aluminum or copper materials. This configuration aids in shielding and heat dissipation. For example, F4BTM300-AL denotes the F4BTM300 model with an aluminum-based substrate.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com