BICHENGPCBBicheng Technologies Limited

F4BTD350S 20mil 2L ENIG High Thermal Conductivity PTFE Ceramic PCB

(Custom PCBs are tailored products; the images and specifications provided are for reference only.)

Brief introduction

(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)

The F4BTD350S is a high thermal conductivity PTFE resin high-frequency substrate, reinforced with glass fiber cloth and containing a large amount of high thermal conductivity special ceramics. It features low loss and high thermal conductivity, and is a new generation of high-frequency materials developed for applications requiring low insertion loss and high heat dissipation efficiency. It can replace similar foreign products.

The excellent low loss and thermal conductivity performance increase the microwave power tolerance, extend the service life of devices, and make them more suitable for high-temperature and long-term operation, ensuring equipment reliability and low-cost maintenance. At the same time, the material has the advantages of low thermal expansion coefficient, dimensional stability, high electrical strength, and high insulation performance, making PCB processing easier, through-hole reliability higher, soldering faults lower, component matching better, and environmental adaptability stronger.

This 2-layer rigid PCB is constructed with F4BTD350S as the core material at 20mil (0.508mm) thickness, with ENIG (Electroless Nickel Immersion Gold) surface finish, black top solder mask, white top silkscreen, and 1oz copper on both sides. Its DK of 3.5 and ultra-low loss of 0.0016 make it ideal for high-power RF applications, power amplifiers, antennas, and industrial heating equipment.

The F4BTD350S is a high thermal conductivity PTFE resin high-frequency substrate, reinforced with glass fiber cloth and containing a large amount of high thermal conductivity special ceramics. It features low loss and high thermal conductivity, and is a new generation of high-frequency materials developed for applications requiring low insertion loss and high heat dissipation efficiency. It can replace similar foreign products.

The excellent low loss and thermal conductivity performance increase the microwave power tolerance, extend the service life of devices, and make them more suitable for high-temperature and long-term operation, ensuring equipment reliability and low-cost maintenance. At the same time, the material has the advantages of low thermal expansion coefficient, dimensional stability, high electrical strength, and high insulation performance, making PCB processing easier, through-hole reliability higher, soldering faults lower, component matching better, and environmental adaptability stronger.

The circuit boards can be processed using standard PTFE sheet technology. The excellent mechanical and physical properties of the sheet make it suitable for multi-layer, high multi-layer, and backplane processing. At the same time, it shows excellent processability in dense hole and fine line processing.

Technical features & benefits

  • Dielectric Constant (Dk): 3.5 ± 0.07 at 10GHz
  • Dissipation Factor (Df): 0.0016 at 10GHz
  • High Thermal Conductivity: 1.25 W/(M·K) — Exceptional heat dissipation for high-power applications
  • CTE x-axis: 11 ppm/°C, CTE y-axis: 10 ppm/°C, CTE z-axis: 40 ppm/°C (-55°C to 288°C)
  • Thermal Coefficient of Dk: -45 ppm/°C (-55°C to 150°C)
  • Relative Tracking Index (CTI): 600V (23°C/50%/24H)
  • Moisture Absorption: ≤0.05%
  • Flammability: UL-94 V-0
  • High Power Tolerance & Extended Device Service Life
  • Radiation Resistance & Low Outgassing for aerospace applications
  • ENIG Finish — Excellent solderability, corrosion resistance, and wire bondability
  • High Thermal Conductivity (1.25 W/M·K) — Superior heat dissipation for high-power RF and microwave designs
  • Low Loss (Df 0.0016 @ 10GHz) — Excellent high-frequency performance with minimal signal loss
  • Stable DK (3.5 ± 0.07 @ 10GHz) — Consistent impedance control for high-frequency designs
  • Increased Microwave Power Tolerance — Extends device service life and reliability
  • Excellent Mechanical & Physical Properties — Suitable for multi-layer, high multi-layer, and backplane processing
  • Low CTE & Dimensional Stability — Reliable plated through holes and dimensional stability
  • High Electrical Strength & Insulation Performance — Superior reliability in demanding environments
  • Radiation Resistance & Low Outgassing — Ideal for aerospace and defense applications
  • Feature — Benefit
  • DK 3.5 ± 0.07 @ 10GHz — Stable dielectric constant for consistent impedance control
  • Df 0.0016 @ 10GHz — Ultra-low loss for high-frequency RF and microwave designs
  • Thermal Conductivity 1.25 W/M·K — Exceptional heat dissipation for high-power applications
  • CTE: 11/10/40 ppm/K — Matched to copper, reliable plated through holes
  • TCDK: -45 ppm/°C — Low thermal coefficient of dielectric constant
  • CTI: 600V — High tracking resistance for safety-critical applications
  • Moisture Absorption ≤0.05% — Excellent stability in humid conditions
  • UL 94 V-0 — Flame retardant for safety compliance
  • High Power Tolerance — Extended device service life and reliability
  • ENIG Finish — Excellent solderability, corrosion resistance, wire bondability

Product images

F4BTD350S PCB
F4BTD350S Material

PCB specifications

ItemSpecification
Base materialWangling F4BTD350S (PTFE + Ceramic + Fiberglass)
Layer count2-layer (double sided)
Board dimensions79mm x 110mm = 1 PCS, ±0.15mm
Minimum Trace/Space7/9 mils
Minimum Hole Size0.6mm
Blind viasNo
Finished board thickness0.6mm (including copper)
Finished Cu weight1 oz (35 μm / 1.4 mils) all layers
Via plating thickness20 μm
Surface finishENIG (Electroless Nickel Immersion Gold)
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskBlack
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment
ParameterOptions
Dielectric Thickness Range0.127mm(5mil), 0.254mm(10mil), 0.508mm(20mil), 0.635mm(25mil), 0.762mm(30mil), 1.016mm(40mil), 1.270mm(50mil), 1.524mm(60mil), 2.03mm(80mil), 2.54mm(100mil), 3.175mm(125mil), 4.06mm(160mil), 5.08mm(200mil), 6.35mm(250mil) (± tolerance per thickness)
Thickness IncrementsAvailable in 0.127mm (5mil) increments
Standard Panel Sizes305x460mm (12x18"), 460x610mm (18x24")
Standard Copper Cladding0.5oz (18μm), 1oz (35μm) — RTF low roughness copper foil
DK Value3.5 (F4BTD350S)
Aluminum/Copper Base OptionF4BTD***-AL, F4BTD***-CU for shielding/heat dissipation
Special OptionsContact Wangling for non-standard thicknesses and custom sizes

Layer stack-up

Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)

Layer: Dielectric, Material: F4BTD350S Core, Thickness: 0.508 mm (20mil)

Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)

PCB Statistics

Components: 18

Total Pads: 22

Thru Hole Pads: 10

Top SMT Pads: 12

Bottom SMT Pads: 0

Vias: 6

Nets: 2

Application areas

  • High power radio frequency (RF) systems
  • Power amplifiers and combiners
  • Antennas (base station, satellite, phased array)
  • Industrial heating equipment
  • Couplers, filters, and power splitters
  • Microwave and radar systems
  • Aerospace and defense applications

Properties

F4BTD350S Typical Properties

PropertyF4BTD350SDir.UnitsConditionTest Method
Dielectric Constant (Typical), 2 GHz3.52Z—2 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Typical), 10 GHz3.50Z—10 GHzIPC-TM-650 2.5.5.5
Dk Tolerance±0.07————
Dielectric Constant (Design), 10 GHz3.62Z—10 GHz50Ω microstrip line
Dissipation Factor, 2 GHz0.0012——2 GHz—
Dissipation Factor, 10 GHz0.0016Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk-45—ppm/°C-55 to 150°CIPC-TM-650 2.5.5.5
Copper Peel Strength (1 oz Cu)>0.8—N/mm1 oz Cu foilIPC-TM-650 2.4.8
Volume Resistivity1×10¹¹—MΩ·cmC96/23/95IPC-TM-650 2.5.17.1
Surface Resistance1×10¹²—MΩC96/23/95IPC-TM-650 2.5.17.1
Electrical Strength (Z-direction)25—KV/mm5 kW, 500 V/sIPC-TM-650 2.5.6
Breakdown Voltage (X/Y)38—KV5 kW, 500 V/sIPC-TM-650 2.5.6
CTE (X, Y)11, 10X,Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)40Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Td (5% mass loss)500—°CTGA, 5% lossIPC-TM-650 2.4.24.6
Thermal Conductivity (Z)1.25ZW/(m·K)—ASTM D5470
Specific Heat0.8—J/g·°C——
Density2.21—g/cm³Room tempASTM D792
Water Absorption0.05—%20±2°C, 24 hIPC-TM-650 2.6.2.1
FlammabilityV-0———UL 94

Quality Assurance

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com