F4BME265 High Frequency PCB DK2.65 PTFE Double-Sided with OSP and Green Mask
(Printed Circuit Boards are custom-made products; the images and specifications provided are for reference only.)
Brief introduction
The PCB we are discussing today measures 89mm x 61mm and contains a single piece per panel. This is a double-sided PCB, featuring two conductive layers for circuitry. It does not include any surface mount components; instead, it is equipped with through-hole components. The layer stack comprises copper layers with a finished thickness of 35µm (equivalent to 1oz). Sandwiched in between is F4BME265 material, which has a thickness of 1.5mm, followed by another copper layer of the same 35µm (1oz) thickness on the opposite side after plating.
Technical features & benefits
- Customizable DK: Options range from DK2.17 to 3.0.
- Low Loss: Designed for efficient performance
- Excellent PIM Index: F4BME with RTF copper foil achieves outstanding performance metrics.
- Diverse Sizes & Cost Efficiency
- Irradiation Resistance & Low Emissions
- Commercial Viability: Suitable for mass production
Product images
PCB specifications
F4BME265 High Frequency PCB DK2.65 PTFE Double Sided With OSP and Green Mask
| PCB SIZE | 89 x 61mm = 1PCS |
| BOARD TYPE | Microwave PCB |
| Number of Layers | Double sided PCB |
| Surface Mount Components | NO |
| Through Hole Components | YES |
| Minimum Trace and Space: | 6mil/9mil |
| Minimum / Maximum Holes: | 0.9/2.3mm |
| Number of Drill Holes: | 156 |
| Surface Finish | OSP, Thickness >0.2µm |
| Solder Mask Color: | Gloss Green, Taiyo PSR-2000GT600D |
| Final height of PCB: | 1.6 mm ±0.16 |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally |
Layer stack-up
- copper - 18um(0.5oz)+PLATE
- F4BME265 1.524mm
Application areas
- Microwave, RF, radar technologies
- Phase shifters and passive components
- Power dividers, couplers, and combiners
- Feed networks and phased array antennas
- Satellite communications and base station antennas
Properties
F4BM / F4BME Series Typical Properties
| Property | F4BM217 | F4BM220 | F4BM233 | F4BM245 | F4BM255 | F4BM265 | F4BM275 | F4BM294 | F4BM300 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dielectric Constant (Typical), 10 GHz | 2.17 | 2.20 | 2.33 | 2.45 | 2.55 | 2.65 | 2.75 | 2.94 | 3.00 | — | — | 10 GHz | — |
| Dk Tolerance | ±0.04 | ±0.04 | ±0.04 | ±0.05 | ±0.05 | ±0.05 | ±0.05 | ±0.06 | ±0.06 | — | — | — | — |
| Dissipation Factor, 10 GHz | 0.001 | 0.001 | 0.0011 | 0.0012 | 0.0013 | 0.0013 | 0.0015 | 0.0016 | 0.0017 | — | — | 10 GHz | — |
| Dissipation Factor, 20 GHz | 0.0014 | 0.0014 | 0.0015 | 0.0017 | 0.0018 | 0.0019 | 0.0021 | 0.0023 | 0.0025 | — | — | 20 GHz | — |
| Thermal Coefficient of Dk | -150 | -142 | -130 | -120 | -110 | -100 | -92 | -85 | -80 | — | ppm/°C | -55 to 150°C | — |
| Peel Strength (F4BM, 1oz ED) | >1.8 | >1.8 | >1.8 | >1.8 | >1.8 | >1.8 | >1.8 | >1.8 | >1.8 | — | N/mm | 1 oz ED copper | — |
| Peel Strength (F4BME, 1oz RTF) | >1.6 | >1.6 | >1.6 | >1.6 | >1.6 | >1.6 | >1.6 | >1.6 | >1.6 | — | N/mm | 1 oz RTF copper | — |
| Volume Resistivity | ≥6×10⁶ | ≥6×10⁶ | ≥6×10⁶ | ≥6×10⁶ | ≥6×10⁶ | ≥6×10⁶ | ≥6×10⁶ | ≥6×10⁶ | ≥6×10⁶ | — | MΩ·cm | Room temp | — |
| Surface Resistivity | ≥1×10⁶ | ≥1×10⁶ | ≥1×10⁶ | ≥1×10⁶ | ≥1×10⁶ | ≥1×10⁶ | ≥1×10⁶ | ≥1×10⁶ | ≥1×10⁶ | — | MΩ | Room temp | — |
| Dielectric Strength (Z) | >23 | >23 | >23 | >25 | >25 | >25 | >28 | >30 | >30 | — | kV/mm | 5 kV, 500V/s | — |
| Dielectric Breakdown (X/Y) | >30 | >30 | >32 | >32 | >34 | >34 | >35 | >36 | >36 | — | kV | 5 kV, 500V/s | — |
| CTE (X, Y) | 25, 34 | 25, 34 | 22, 30 | 20, 25 | 16, 21 | 14, 17 | 14, 16 | 12, 15 | 12, 15 | X,Y | ppm/°C | -55 to 288°C | — |
| CTE (Z) | 240 | 240 | 205 | 187 | 173 | 142 | 112 | 98 | 95 | Z | ppm/°C | -55 to 288°C | — |
| Moisture Absorption | ≤0.08 | ≤0.08 | ≤0.08 | ≤0.08 | ≤0.08 | ≤0.08 | ≤0.08 | ≤0.08 | ≤0.08 | — | % | 20±2°C, 24 hrs | — |
| Density | 2.17 | 2.18 | 2.20 | 2.22 | 2.25 | 2.25 | 2.28 | 2.29 | 2.29 | — | g/cm³ | Room temp | — |
| Thermal Conductivity (Z) | 0.24 | 0.24 | 0.28 | 0.30 | 0.33 | 0.36 | 0.38 | 0.41 | 0.42 | Z | W/(m·K) | — | — |
| Continuous Operating Temp | -55 to +260 | -55 to +260 | -55 to +260 | -55 to +260 | -55 to +260 | -55 to +260 | -55 to +260 | -55 to +260 | -55 to +260 | — | °C | — | — |
| Flammability | V-0 | V-0 | V-0 | V-0 | V-0 | V-0 | V-0 | V-0 | V-0 | — | — | — | UL94 |
F4BME High Frequency Laminates
F4BME series laminates are produced through a precise formulation and strict pressing of fiberglass cloth, polytetrafluoroethylene resin, and polytetrafluoroethylene film. Compared to F4B, these laminates demonstrate enhanced electrical performance, characterized by a broader range of dielectric constants, reduced dielectric loss, improved insulation resistance, and increased stability.
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
