BICHENGPCBBicheng Technologies Limited

F4BME High Frequency PCB Advanced Laminates for Microwave and RF Applications

(PCB's are custom-made products, the picture and parameters shown are just for reference)

Brief introduction

The F4BME High Frequency PCB series is constructed from a carefully formulated blend of fiberglass cloth, polytetrafluoroethylene (PTFE) resin, and PTFE film. This design enhances electrical performance compared to the F4B series, featuring a wider range of dielectric constants, lower dielectric loss, increased insulation resistance, and improved stability, making it a viable alternative to similar foreign products.

The F4BME and F4BM variants have the same dielectric layer but differ in copper foil combinations: F4BME uses reverse-treated foil (RTF) copper foil, providing excellent Passive Intermodulation (PIM) performance, precise line control, and reduced conductor loss. In contrast, F4BM utilizes ED copper foil for applications without PIM requirements.

By adjusting the ratio of PTFE to fiberglass cloth, both variants achieve precise control of the dielectric constant, ensuring low loss and enhanced dimensional stability.

Technical features & benefits

  • Customizable dielectric constant (DK) options: 2.17 to 3.0
  • Low loss characteristics
  • F4BME with RTF copper foil for excellent PIM performance
  • Cost-effective and diverse size options
  • Radiation resistance and low outgassing
  • Commercially available with large-scale production

Application areas

  • Displayed on the screen is a 2-layer copper high-frequency PCB with a low DK of 2.2, utilizing F4BME material and HASL surface finish on a 3.0mm substrate.
  • F4BME high-frequency PCB finds applications in microwave, RF, and radar systems, as well as in phase shifters, passive components, power dividers, couplers, combiners, feed networks, phased array antennas, satellite communications, and base station antennas.

Our PCB Capability

PCB Capability (F4BME)

PCB Material:PTFE glass fiber cloth copper clad laminates
Designation (F4BME)F4BMEDK (10GHz)DF (10 GHz)
F4BME2172.17±0.040.0010
F4BME2202.20±0.040.0010
F4BME2332.33±0.040.0011
F4BME2452.45±0.050.0012
F4BME2552.55±0.050.0013
F4BME2652.65±0.050.0013
F4BME2752.75±0.050.0015
F4BME2942.94±0.060.0016
F4BME3003.00±0.060.0017
Layer count:Single Sided, Double Sided, Multilayer, Hybrid
Copper weight:0.5oz, 1oz, 2oz
Dielectric thickness:0.127mm~12.0mm
PCB size:≤400mm X 500mm
Solder mask:Green, Black, Blue, Yellow, Red etc.
Surface finish:Bare copper, HASL, ENIG, Immersion Ag, Immersion Sn, OSP, ENEPIG

Properties

F4BM / F4BME Series Typical Properties

PropertyF4BM217F4BM220F4BM233F4BM245F4BM255F4BM265F4BM275F4BM294F4BM300Dir.UnitsConditionTest Method
Dielectric Constant (Typical), 10 GHz2.172.202.332.452.552.652.752.943.00——10 GHz—
Dk Tolerance±0.04±0.04±0.04±0.05±0.05±0.05±0.05±0.06±0.06————
Dissipation Factor, 10 GHz0.0010.0010.00110.00120.00130.00130.00150.00160.0017——10 GHz—
Dissipation Factor, 20 GHz0.00140.00140.00150.00170.00180.00190.00210.00230.0025——20 GHz—
Thermal Coefficient of Dk-150-142-130-120-110-100-92-85-80—ppm/°C-55 to 150°C—
Peel Strength (F4BM, 1oz ED)>1.8>1.8>1.8>1.8>1.8>1.8>1.8>1.8>1.8—N/mm1 oz ED copper—
Peel Strength (F4BME, 1oz RTF)>1.6>1.6>1.6>1.6>1.6>1.6>1.6>1.6>1.6—N/mm1 oz RTF copper—
Volume Resistivity≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶≥6×10⁶—MΩ·cmRoom temp—
Surface Resistivity≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶≥1×10⁶—MΩRoom temp—
Dielectric Strength (Z)>23>23>23>25>25>25>28>30>30—kV/mm5 kV, 500V/s—
Dielectric Breakdown (X/Y)>30>30>32>32>34>34>35>36>36—kV5 kV, 500V/s—
CTE (X, Y)25, 3425, 3422, 3020, 2516, 2114, 1714, 1612, 1512, 15X,Yppm/°C-55 to 288°C—
CTE (Z)2402402051871731421129895Zppm/°C-55 to 288°C—
Moisture Absorption≤0.08≤0.08≤0.08≤0.08≤0.08≤0.08≤0.08≤0.08≤0.08—%20±2°C, 24 hrs—
Density2.172.182.202.222.252.252.282.292.29—g/cm³Room temp—
Thermal Conductivity (Z)0.240.240.280.300.330.360.380.410.42ZW/(m·K)——
Continuous Operating Temp-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260-55 to +260—°C——
FlammabilityV-0V-0V-0V-0V-0V-0V-0V-0V-0———UL94

Final - F4BME series aluminum-based/copper-based boards

These F4BME series of laminates can provide aluminum-based or copper-based materials, where one side of the dielectric layer is covered with copper foil, and the other side is covered with either aluminum-based material or copper-based, serving as shielding or heat dissipation purposes.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com

Note: This page carried an inconsistent legacy field on the old site. It has been corrected to match the actual page content and is queued for human review.