BICHENGPCBBicheng Technologies Limited

Taconic TLX-9 DK2.50 Df0.0019 (0.13-3.18mm+) PTFE/Woven Glass Laminate

Brief introduction

Taconic TLX laminates are PTFE/woven glass copper-clad laminates manufactured with over 35 years of coating experience. TLX-9 features a dielectric constant of 2.50 ±0.04 and dissipation factor of 0.0019 at 10 GHz. These materials offer exceptionally well-controlled electrical and mechanical properties, with excellent dimensional stability and virtually no moisture absorption during fabrication.

Technical features & benefits

  1. 1.Excellent mechanical and thermal properties
  2. 2.Low and stable dielectric constant
  3. 3.Tightly controlled dielectric constant (±0.04)
  4. 4.Low dissipation factor (0.0019 @ 10 GHz)
  5. 5.UL 94 V-0 flammability rating
  6. 6.Virtually no moisture absorption (<0.02%)
  7. 7.High dielectric breakdown (>60 kV)
  8. 8.Excellent dimensional stability
  9. 9.Can be sheared, drilled, milled, and plated using standard PTFE/woven glass methods

Application areas

  • LNAs, LNBs, and LNCs
  • PCS/PCN Large Format Antennas
  • High Power Amplifiers
  • Passive Components
  • Radar Systems
  • Phased Array Antennas
  • Mobile Communication Systems
  • Microwave Test Equipment
  • Microwave Transmission Devices
  • RF Components
Taconic TLX-9 Laminate

Typical properties: TLX-9

Material-level dielectric and mechanical properties, distinct from the board-level specifications above.

Open the standalone data sheet (printable)
TLX-9
PropertyTest MethodUnitsValue
Electrical Properties
Dielectric Constant @ 10 GHzIPC-TM 650 2.5.5.5—2.50
Dissipation Factor @ 10 GHzIPC-TM 650 2.5.5.5—0.0019
Dielectric BreakdownIPC-TM 650 2.5.6kV>60
Volume ResistivityIPC-TM 650 2.5.17.1MΩ·cm10⁷
Surface ResistivityIPC-TM 650 2.5.17.1MΩ10⁷
Arc ResistanceIPC-TM 650 2.5.1seconds>180
Mechanical Properties
Flexural Strength (Lengthwise)IPC-TM 650 2.4.4lbs/in²>23,000
Flexural Strength (Crosswise)IPC-TM 650 2.4.4lbs/in²>19,000
Peel Strength (1 oz copper)IPC-TM 650 2.4.8lbs/linear in12.0
Thermal Properties
Thermal ConductivityASTM F 433W/m/K0.19
x-y CTEASTM D 3386 (TMA)ppm/°C9-12
z CTEASTM D 3386 (TMA)ppm/°C130-145
Physical Properties
Moisture AbsorptionIPC-TM 650 2.6.2.1%<0.02
Flammability RatingUL-94—V-0

Available configurations

  • Dielectric Constant: 2.50 ± 0.04.
  • Dielectric Thickness: Available in a wide range starting from 0.0050 inches (0.13 mm), typically covering thicknesses from 0.13 mm up to 0.78 mm and above.
  • Standard Sheet Size: 36" x 48" (914mm x 1220mm)
  • Typical Panel Sizes Available: 12" x 18" (304mm x 457mm), 16" x 18" (406mm x 457mm), 18" x 24" (457mm x 610mm), 16" x 36" (406mm x 914mm), 24" x 36" (610mm x 914mm), 18" x 48" (457mm x 1220mm)
  • Copper Cladding Options (Electrodeposited): CH: ½ oz./sq. ft. (~0.0007" / ~18 μm), C1: 1 oz./sq. ft. (~0.0014" / ~35 μm), C2: 2 oz./sq. ft. (~0.0028" / ~70 μm)
  • Ordering Example: TLX-9-0310-CH/CH-18" x 24" (or TLX-9-0310-CH/CH-457mm x 610mm)

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com