8-Layer HDI RF PCB RO4350B 1.6mm ENEPIG Finish Impedance Controlled
(Custom PCBs are custom-made products, images and specifications are for reference only.)
Brief introduction
(Custom PCBs are tailored products; the images and specifications provided are for reference only.)
Rogers RO4350B materials are proprietary woven glass reinforced hydrocarbon/ceramics that provide electrical performance similar to PTFE/woven glass while maintaining manufacturability like epoxy/glass. RO4350B laminates offer tight control on dielectric constant (Dk) and low loss, making them cost-effective alternatives to conventional microwave laminates. They are rated UL 94 V-0 for active devices and high-power RF designs.
The RO4450F bondply is compatible with multi-layer constructions and offers a high post-cure Tg, making it ideal for sequential laminations. It demonstrates improved lateral flow capability, making it suitable for designs with challenging fill requirements.
PCB specifications
| Base Material | RO4350B |
| Layer Count | 8-layer |
| Board Dimensions | 96.4 mm x 163.9 mm (3 Types = 3 PCS, ±0.15 mm) |
| Min. Trace/Space | 4/6 mils |
| Min. Hole Size | 0.4 mm |
| Blind Vias | GTL-L7, L3-GBL, GTL-L2, L7-GBL, GTL-L3, GTL-L4, GTL-L5, L5-GBL, L4-GBL, GTL-L6, L6-GBL, L2-GBL (mechanical drill) |
| Finished Board Thickness | 1.8 mm |
| Finished Copper Weight | Outer layers: 1 oz (1.4 mils) Inner layers: 1 oz (1.4 mils) / 0.5 oz (0.7 mils) |
| Via Plating Thickness | 20 µm |
| Surface Finish | Electroless Nickel Immersion Gold (ENIG) |
| Top Silkscreen | White |
| Bottom Silkscreen | White |
| Top Solder Mask | Green |
| Bottom Solder Mask | Green |
| Vias | All are resin filled and capped |
| Testing | 100% Electrical test prior to shipment |
| Impedance Control | 50 ohm on various layers |
Layer stack-up
PCB Stackup: 8-layer Rigid PCB
- Copper Layer 1: 17 µm + plating
- RO4350B Core: 0.168 mm (6.6 mils)
- Copper Layer 2: 17 µm
- 8 mil RO4450F Bondply
- Copper Layer 3: 35 µm
- RO4350B Core: 0.127 mm (5 mils)
- Copper Layer 4: 17 µm
- 20 mil RO4450F Bondply
- Copper Layer 5: 17 µm
- RO4350B Core: 0.127 mm (5 mils)
- Copper Layer 6: 35 µm
- 8 mil RO4450F Bondply
- Copper Layer 7: 17 µm
- RO4350B Core: 0.168 mm (6.6 mils)
- Copper Layer 8: 17 µm + plating
PCB Statistics
- Components: 76
- Total Pads: 303
- Thru Hole Pads: 117
- Top SMT Pads: 121
- Bottom SMT Pads: 65
- Vias: 335
- Nets: 6
Application areas
- Cellular Base Station Antennas
- RF Identification Tags
- Automotive Radar and Sensors
- LNBs for Direct Broadcast Satellites
Properties
RO4350B Typical Properties
| Property | RO4350B | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.48 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.66 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0037 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +50 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.2 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 5.7 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.05 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.69 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 10 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 12 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 32 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.0 (0.88) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.9 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
Quality Assurance
- The artwork supplied for this PCB is in the Gerber RS-274-X format, adhering to IPC-Class-2 quality standards. This product is available for distribution worldwide.
RO4350B Material Features
- Dielectric Constant: DK 3.48 ± 0.05 at 10GHz/23°C
- Dissipation Factor: 0.0037 at 10GHz/23°C
- Thermal Conductivity: 0.69 W/m/°K
- CTE: X-axis 10 ppm/°C, Y-axis 12 ppm/°C, Z-axis 32 ppm/°C
- High Tg Value: >280°C
- Low Water Absorption: 0.06%
RO4450F Bondply Features
- Optimal dielectric constant (Dk 3.52±0.05)
- Low dissipation factor (Df 0.004 @10GHz)
- Excellent thermal conductivity (0.65 W/m/K)
- Superior lamination compatibility
- Multiple lamination cycle capability
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
