BICHENGPCBBicheng Technologies Limited

MEGTRON6 R-5775(G) 14-Layer PCB | Panasonic M6 2.123mm High Speed Low Loss with ENEPIG

(Custom PCBs are tailored products; the images and specifications provided are for reference only.)

Brief introduction

(PCBs are custom-made products; the images and parameters shown are for reference only)

This 14-layer multilayer printed circuit board is constructed using Panasonic MEGTRON6 series materials – R-5775(G) laminate and R-5670(G) prepreg. MEGTRON6 is a high-speed, low-loss material system designed for advanced digital and RF/microwave applications requiring superior signal integrity and thermal reliability.

MEGTRON6 is Panasonic's high-speed, low-loss multi-layer material system. The R-5775(G) laminate and R-5670(G) prepreg feature low Dk glass cloth construction, offering excellent electrical performance for high-speed digital and RF/microwave applications.

Technical features & benefits

  • High Tg: 185°C (DSC) / 210°C (DMA) for excellent thermal reliability
  • Td: 410°C for exceptional thermal stability
  • T288 >120 minutes (with and without Cu) for superior thermal resistance
  • Stable Dk: 3.40 @ 1GHz (Core Type 30) for consistent impedance control
  • Low Df: 0.002 @ 1GHz for minimal signal loss in high-speed digital applications
  • Low CTE: X/Y 14-16 ppm/°C for excellent dimensional stability
  • Z-axis CTE: 45 ppm/°C (α1) / 260 ppm/°C (α2)
  • Thermal Conductivity: 0.42 W/m·K for effective heat dissipation
  • UL 94 V-0 flammability rating
  • Resin plugged vias (<0.4mm) with electroplated fill for reliable interconnections
  • ENEPIG finish for excellent solderability, corrosion resistance, and wire bondability
  • IPC-6012 Class 3 for high-reliability applications

Product images

SCGA-500 GF265 PCB
Megtron 6 Laminate

Layer stack-up

The 14-layer stack-up consists of R-5775(G) cores and R-5670(G) prepreg layers with the following configuration:

  • Layer:L1;Material:Copper;Description:Top Layer – 1oz + plating;Thickness (mm):0.035
  • Layer:PP;Material:R-5670(G);Description:Prepreg 1080(68%) x1;Thickness (mm):0.0852
  • Layer:L2;Material:Copper;Description:Inner Layer – 0.5oz;Thickness (mm):0.0153
  • Layer:Core;Material:R-5775G(HVLP);Description:0.2mm (Exclude Copper);Thickness (mm):0.200
  • Layer:L3;Material:Copper;Description:Inner Layer – 0.5oz;Thickness (mm):0.0153
  • Layer:PP;Material:R-5670(G);Description:Prepreg 1035(70%) x2;Thickness (mm):0.1142
  • Layer:L4;Material:Copper;Description:Inner Layer – 0.5oz;Thickness (mm):0.0153
  • Layer:Core;Material:R-5775G(HVLP);Description:1035(70%) x2;Thickness (mm):0.1142
  • Layer:L5;Material:Copper;Description:Inner Layer – 0.5oz;Thickness (mm):0.0153
  • Layer:PP;Material:R-5670(G);Description:Prepreg 1080(68%) x2;Thickness (mm):0.1708
  • Layer:L6;Material:Copper;Description:Inner Layer – 0.5oz;Thickness (mm):0.0153
  • Layer:Core;Material:R-5775G(HVLP);Description:1035(70%) x2;Thickness (mm):0.1132
  • Layer:L7;Material:Copper;Description:Inner Layer – 1oz;Thickness (mm):0.0305
  • Layer:PP;Material:R-5670(G);Description:Prepreg 0.5oz;Thickness (mm):0.0153
  • Layer:L8;Material:Copper;Description:Inner Layer – 0.5oz;Thickness (mm):0.0153
  • Layer:Core;Material:R-5775G(HVLP);Description:—;Thickness (mm):—
  • Layer:L9;Material:Copper;Description:Inner Layer – 0.5oz;Thickness (mm):0.0153
  • Layer:L10;Material:Copper;Description:Inner Layer – 0.5oz;Thickness (mm):0.0153
  • Layer:L11;Material:Copper;Description:Inner Layer – 1oz;Thickness (mm):0.0305
  • Layer:L12;Material:Copper;Description:Inner Layer – 0.5oz;Thickness (mm):0.0153
  • Layer:L13;Material:Copper;Description:Inner Layer – 0.5oz;Thickness (mm):0.0153
  • Layer:L14;Material:Copper;Description:Bottom Layer – 0.5oz + plating;Thickness (mm):0.0144

Application areas

  • High speed digital printed circuit designs
  • Telecommunications infrastructure
  • RF and microwave circuitry
  • High-performance computing
  • Networking and communication equipment
  • Aerospace and defense applications

Properties

MEGTRON 6 R-5775(G) (Normal glass cloth) Typical Properties

PropertyR-5775(G)Dir.UnitsConditionTest Method
Glass Transition Temp (Tg, DSC)185—°CCondition ADSC
CTE (Z, α1, pre-Tg)45Zppm/°CCondition AIPC-TM-650 2.4.24
CTE (Z, α2, post-Tg)260Zppm/°CCondition AIPC-TM-650 2.4.24
T288 (with copper)>120—minCondition AIPC-TM-650 2.4.24.1
Dielectric Constant (Dk)3.7Z—C-24/23/50IPC-TM-650 2.5.5.9
Dielectric Constant (Dk) @ 13 GHz3.62Z—C-24/23/50Balanced-type circular disk resonator
Dissipation Factor (Df)0.002Z—C-24/23/50IPC-TM-650 2.5.5.9
Dissipation Factor (Df) @ 13 GHz0.0046Z—C-24/23/50Balanced-type circular disk resonator
Peel Strength (1 oz / 35 µm H-VLP Cu)0.8—kN/mCondition AIPC-TM-650 2.4.8

Quality Assurance

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-6012 Class 3
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

Basic Specifications

Base MaterialPanasonic MEGTRON6 R-5775(G) Laminate + R-5670(G) Prepreg
Layer Count14 layers
Board Dimensions100mm x 98mm = 1 PCS
Finished Board Thickness2.123mm
Finished Cu WeightAll layers: 35μm (1 oz)
Plated Copper Thickness25μm (IPC-6012 Class 3)
Surface FinishENEPIG (Electroless Nickel Electroless Palladium Immersion Gold)
Solder Mask / LegendGreen / White (both sides)
Impedance ControlYes (as per design)
Resin Plugged ViasAll vias <0.4mm with resin plug + electroplated fill
StandardIPC-6012 Class 3
100% Electrical TestUsed prior to shipment

Total finished thickness: 2.123mm

M6 STACKUP
IMPEDANCE DATA PCB
IMPEDANCE DATA PCB
IMPEDANCE DATA PCB

MEGTRON6 M6 Process Guidelines

Material Storage: Laminate should be stored flat in a cool dry environment. Avoid bending or scratching the laminate surface. When possible store the laminate in the original container. Prepreg should be stored flat in a cool dry controlled environment, 73°F (23°C) or less and 50% RH or less. Extended storage of prepreg should be at a reduced temperature of 41°F (5°C). Open bags of prepreg must be resealed. Prepreg should not be exposed to open environments for more than 8 hours total cumulatively under the above conditions or as agreed upon between user and supplier.

Laminate Surface Preparation: Regular Shiny Copper can be cleaned using industry standard chemical clean or mechanical clean. Reverse Treat Copper should be cleaned using industry standard chemical clean.

Inner Layer Bond Treatment: Black or Brown Oxide can be used. In the case of using Black Oxide, please check whether peel strength is acceptable for the usage. Alternative Oxide Treatment with organic coating using a Peroxide/Sulfuric etch technology is preferred.

Drying: Dry finished inner layers completely to remove any absorbed moisture or surface moisture. A racked bake at 225°F (105°C) for 20-30 minutes is preferred. For conveyorized alternative oxide processing, some equipment may have sufficient drying capability. However, a racked bake is suggested.

Drilling Parameters: The following guidelines are provided as general recommendations. Process optimization may be necessary. Drilling parameters should be adjusted depending on hole size, layer count, panel thickness, stack count and stack height etc.

Recommended Drilling Parameters for R-5775 / R-5670:

Diameter (mm)Spindle Speed (k rpm)Velocity (m/min)Infeed (m/min) minChipload (μ/rev) minInfeed (m/min) maxChipload (μ/rev) maxBit Life (hits)
0.201601001.6102.415700-1,000
0.251601261.8112.818700-1,000
0.301601511.9123.220700-1,000
0.351371511.8133.022700-1,000
0.401201511.8152.924700-1,000
0.451071511.8172.725700-1,000
0.50961511.8192.7281,400-2,000
0.55871501.8212.6301,400-2,000
0.60801511.7212.6331,400-2,000
0.65741511.7232.6351,400-2,000
0.70681491.7252.6381,400-2,000
0.75641511.6252.6411,400-2,000
0.80601511.6272.5421,400-2,000
0.85561491.6292.4431,400-2,000
0.90531501.6302.4451,400-2,000

Note: 1) Spindle speed should be adjusted to make velocity 100-150 m/min. 2) To use lubricant sheets like LE sheets as entry sheets is recommendable. 3) To use drilling bits with high helix angle is recommendable. 4) Peck drilling is recommendable for thin drilling bits. 5) Please adjust drilling parameters after checking qualities of through holes.

Lamination Profile: Curing temperature time will be determined by the thickness of multilayer package being laminated. Laminate parameters should be adjusted depending on board thickness, stack count and stack thickness etc. Recommended heat-up rate: 2.0-4.0°C/min. Pressure: 3.0-4.0MPa. Product temperature over 185°C for 75 minutes.

Desmear Processing: The weight loss of R-5775 laminate and R-5670 prepreg is less than that of R-1766 as conventional FR-4 material. Twice of FR-4 condition is recommendable. Desmear parameters should be adjusted depending on board thickness, stack count and stack thickness etc.

Permanganate Desmear: Swelling: alkaline at 65-85°C for 5-10 min; Etching: permanganate at 70-85°C for 10-15 min.

Plasma Desmear: Half time of FR-4 conditions is recommendable.

Combined Desmear (Hybrid with FR-4): First, Plasma Desmear for half time of FR-4 condition, then Permanganate Desmear without swelling process for half time of FR-4 condition continuously.

Final Metal Finishes: Ag plating, Sn plating, Direct gold plating and OSP are good for R-5775. If you use Ni plating like ENIG, baking or long time holding at room temperature (e.g., 5 hours at 150°C, 1 week at room temperature) is needed before Ni plating. It depends on circuit pattern and conditions (circulation, bubbling etc.) of equipment.

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com