TLY-3 2-Layer 20mil Silver-Gold Plate PCB for Millimeter Wave Applications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
TLY-3 laminates are manufactured with very lightweight woven fiberglass and are much more dimensionally stable than chopped fiber reinforced PTFE composites. The woven matrix in the TLY-3 material yields a more mechanically stable laminate that is suitable for high volume manufacturing. The low dissipation factor enables successful deployment for automotive radar applications designed at 77 GHz as well as other antennas in millimeter wave frequencies.
Comparative OEM testing at 77 GHz of lightly reinforced TLY-3 vs. its closest chopped fiber reinforced competitor has shown "drop in"/equivalent insertion losses/dielectric properties. The primary benefit is much higher manufacturing yields. The dielectric constant range is 2.17 to 2.40. For most thicknesses, the dielectric constant can be specified anywhere within this range with a tolerance of +/-0.02. In the low dielectric constant range, the dissipation factor is approximately 0.0009 at 10 GHz. Typical applications include satellite communications, automotive radar, filters, couplers, avionics and phased array antennas.
Ultra-Low Dielectric Constant: 2.33 ±0.02 at 10GHz Exceptional Signal Integrity: Dissipation Factor of 0.0012 at 10GHz Thermal Management: Thermal Conductivity of 0.22 W/mk (Unclad) Dimensional Stability: x CTE 26 ppm/°C, y CTE 15 ppm/°C, z CTE 217 ppm/°C Strong Bonding: Peel Strength 0.5oz 11 lbs/in, 1oz 17 lbs/in Environmental Resistance: Low Moisture Absorption of 0.02% Safety Certified: Flammability Rating of V-0 Space Qualified: Outgassing TML 0.01%, CVCM 0.01%, WVR 0.01%
Manufacturing Excellence: Dimensionally Stable for high volume production Superior RF Performance: Lowest Df for millimeter wave applications Mechanical Reliability: High Peel Strength Environmental Durability: Low Moisture Absorption Consistent Performance: Uniform, Consistent Dk Advanced Processing: Laser Ablatable for precision manufacturing
5. PCB Stackup (2-Layer Rigid Structure)
Copper Layer 1 - 35μm (1oz) TLY-3 Core - 20mil (0.508mm) Copper Layer 2 - 35μm (1oz)
Components: 25Total Pads: 86Thru Hole Pads: 64Top SMT Pads: 22Bottom SMT Pads: 0Vias: 31Nets: 2
Automotive Radar (77GHz)Satellite/Cellular CommunicationsPower AmplifiersLNBs, LNAs, LNCsAerospace SystemsKa, E and W band Applications
Artwork Format: Gerber RS-274-XAccepted Standard: IPC-Class-2Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
