TLY-5 2-Layer 10mil High-Frequency Thin PCB with Immersion Gold
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
TLY-5 laminates are manufactured with very lightweight woven fiberglass and are much more dimensionally stable than chopped fiber reinforced PTFE composites. The woven matrix in the TLY-5 material yields a more mechanically stable laminate that is suitable for high volume manufacturing. The low dissipation factor enables successful deployment for automotive radar applications designed at 77 GHz as well as other antennas in millimeter wave frequencies.
Dielectric constant of 2.2 with tight tolerance 0.02 at 10 GHz/23°C 0.0009 loss tangent at 10GHz Density (specific gravity) of 2.19 g/cm³ Moisture Absorption 0.02% CTE in X-axis of 26 ppm/°C, Y-axis of 15 ppm/°C and Z-axis of 217 ppm/°C
Dimensionally stable Lowest DF Low moisture absorption High copper peel strength Uniform & consistent DK
Copper layer 1 – 35 µm TLY-5 – 0.254 mm (10mil) Copper layer 2 – 35 µm
Components: 9 Total Pads: 41 Thru Hole Pads: 23 Top SMT Pads: 18 Bottom SMT Pads: 0 Vias: 17 Nets: 2
Automotive Radar Satellite/Cellular Communications Power Amplifiers LNBs, LNAs, LNCs Aerospace Ka, E and W band Applications
Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
