TLX-9 2-Layer 50mil Immersion Tin PCB for RF Communications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
TLX-9 is a composite of PTFE/woven glass laminates with exceptionally well controlled electrical and mechanical properties. TLX-9 laminates can be sheared, drilled, milled and plated using standard methods for PTFE/woven fiberglass materials. The laminates are dimensionally stable, and exhibit virtually no moisture absorption during fabrication processes.
TLX-9 measured 2.5 DK with tightly controlled across a broad frequency range and temperature spectrum. The dissipation factor is approximately 0.0019 when measured at 10 GHz. TLX-9 meets stringent flammability standards, achieving a UL 94 V-0 certification for flame retardancy.
Stable Dielectric Constant: 2.5 @ 10 GHz Loss Characteristics: Dissipation Factor 0.0019 @ 10 GHz Excellent Insulation: Dielectric Breakdown >60 kV Environmental Resistance: Moisture Absorption <0.02% High Reliability: Volume Resistivity 10^7 Mohm/cm, Surface Resistivity 10^7 Mohm Mechanical Strength: Flexural Strength Lengthwise >23,000 lbs./in., Crosswise >19,000 lbs./in. Strong Bonding: Peel Strength 12 lbs./linear in. Thermal Management: Thermal Conductivity 0.19 W/m/K. Dimensional Stability: x-y CTE 9-12 ppm/°C, z CTE 130-145 ppm/°C Safety Certified: UL-94 V-0 Flammability Rating
Superior Electrical Performance: Low Dielectric Constant, Low Dissipation Factor Environmental Durability: Low Moisture Absorption High Voltage Capability: High Dielectric Breakdown Mechanical Reliability: Good Peel Strength Thermal Stability: Controlled Coefficient of Thermal Expansion (CTE)
5. PCB Stackup (2-Layer Rigid Structure)
Copper_layer_1 - 35 Taconic TLX-9 Core - 1.27 mm (50mil) Copper_layer_2 - 35 μm
Components: 32Total Pads: 64Thru Hole Pads: 36Top SMT Pads: 28Bottom SMT Pads: 0Vias: 97Nets: 2
LNAs, LNBs, and LNCsPersonal Communications Service / Personal Communications Network (PCS/PCN) Large Format AntennasHigh Power AmplifiersPassive Components
Artwork Format: Gerber RS-274-XAccepted Standard: IPC-Class-2Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
