TLX-0 2-Layer 20mil Immersion Gold PCB for RF Microwave Applications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
TLX series laminates are made using PTFE fiberglass composites, offering reliability in a wide range of RF applications. This material is versatile due to its 2.45 - 2.65 DK range and available thicknesses and copper cladding. It is suitable for low layer count microwave designs.
TLX is a workhorse in the RF microwave substrate world where the fiberglass offers mechanical reinforcement wherever a substrate experiences severe environments such as:
Resistance to creep for PCBs bolted to a housing that encounters high levels of vibration during space launch High temperature exposure in engine modules Radiation resistance in space (see NASA's website for low outgassing materials) Resistance to extreme environments at sea for warship antennas Resistance to a wide temperature range for altimeter substrates during flight
TLX-0 is one the series materials with dielectric constant of 2.45 with tight tolerance of ±0.04.
Low Dielectric Constant: 2.45 ±0.04 at 10GHz Excellent Signal Integrity: Dissipation Factor of 0.0021 at 10GHz Environmental Resistance: Low moisture absorption of 0.02% Dimensional Stability: X axis CTE of 21 ppm/°C, Y CTE of 23 ppm/°C, Z CTE of 215 ppm/°C Mechanical Durability: Strong Peel strength of 12 lbs/in
Superior RF Performance: Excellent PIM Values in PCBs (measured at lower than -160 dBc) Reliable Operation: Excellent Mechanical & Thermal Properties Stable Electrical Characteristics: Low and Stable Dk, Tightly Controlled DK, Low DF Environmental Durability: Dimensionally Stable, Low Moisture Absorption Safety Certified: UL 94 V0 Rating Design Flexibility: For Low Layer Count Microwave Designs
5. PCB Stackup (2-Layer Rigid Structure)
Copper Layer 1 - 35 μm TLX-0 Core - 0.508 mm (20mil) Copper Layer 2 - 35 μm
Components: 32 Total Pads: 73 Thru Hole Pads: 51 Top SMT Pads: 22 Bottom SMT Pads: 0 Vias: 105 Nets: 2
Couplers, splitters, combiners, amplifiers, antennas and passive components Radar systems, mobile communications Microwave test equipment Microwave transmission devices and RF components
Artwork Format: Gerber RS-274-X Accepted Standard: IPC-Class-2 Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
