Taconic TLX-0 2-Layer 20mil Low-Dk PTFE PCB with HASL Finish
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- MOQ
- 1PCS
- Lead time
- 5-8 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
TLX series laminates are made using PTFE fiberglass composites, offering reliability in a wide range of RF applications. This material is versatile due to its 2.45 - 2.65 DK range and available thicknesses and copper cladding. It is suitable for low layer count microwave designs.
TLX is a workhorse in the RF microwave substrate world where the fiberglass offers mechanical reinforcement wherever a substrate experiences severe environments such as:
Resistance to creep for PCBs bolted to a housing that encounters high levels of vibration during space launch High temperature exposure in engine modules Radiation resistance in space (see NASA's website for low outgassing materials) Resistance to extreme environments at sea for warship antennas Resistance to a wide temperature range for altimeter substrates during flight
TLX-0 is one the series materials with dielectric constant of 2.45 with tight tolerance of ± 0.04.
Dielectric Constant of DK 2.45 +/-0.04 at 10GHz Dissipation Factor of 0.0021 at 10GHz Low moisture absorption of 0.02% X axis CTE of 21 ppm/°C, Y CTE of 23 ppm/°C, Z CTE of 215ppm/°C Strong Peel strength of 12 lbs/in
Excellent PIM Values in PCBs (measured at lower than -160 dBc) Excellent Mechanical & Thermal Properties Low and Stable Dk for consistent circuit performance Dimensionally Stable for reliable fabrication Low Moisture Absorption for environmental stability Tightly Controlled DK (±0.04) Low DF (0.0021) for minimal signal loss UL 94 V0 Rating for flame retardancy Ideal for Low Layer Count Microwave Designs Proven performance in extreme environments: space, high temperature, radiation, marine, and wide temperature ranges
Copper layer 1 – 35 μm TLX-0 Core – 0.508 mm (20mil) Copper layer 2 – 35 μm
Components: 21 Total Pads: 58 Thru Hole Pads: 32 Top SMT Pads: 26 Bottom SMT Pads: 0 Vias: 67 Nets: 2
Couplers, splitters, combiners, amplifiers, antennas and passive components Radar systems, mobile communications Microwave test equipment Microwave transmission devices and RF components
Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
