BICHENGPCBBicheng Technologies Limited

Taconic TLX-9 2-Layer 0.3mm EPIG (Nickel-Free) PCB – Low Dk RF Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

MOQ
1PCS
Lead time
7-10 working days
Packaging
Vacuum / Anti-static Packaging
Payment
T/T, Paypal

Brief introduction

TLX-9 is a composite of PTFE/woven glass laminates with exceptionally well controlled electrical and mechanical properties. TLX-9 laminates can be sheared, drilled, milled and plated using standard methods for PTFE/woven fiberglass materials. The laminates are dimensionally stable, and exhibit virtually no moisture absorption during fabrication processes.

TLX-9 measured 2.5 Dk with tightly controlled across a broad frequency range and temperature spectrum. The dissipation factor is approximately 0.0019 when measured at 10 GHz. TLX-9 meets stringent flammability standards, achieving a UL 94 V-0 certification for flame retardancy.

This 2-layer rigid PCB is constructed entirely with Taconic TLX-9 as the core material, making it ideal for LNAs, LNBs, LNCs, PCS/PCN large format antennas, high power amplifiers, and passive components.

Flexural strength lengthwise: >23,000 lbs/in (>159 N/mm²)

Flexural strength crosswise: >19,000 lbs/in (>131 N/mm²)

Peel strength (1 oz copper): 12 lbs/linear in (2.1 N/mm)

Controlled coefficient of thermal expansion (CTE)

Exceptionally well controlled electrical and mechanical properties

4.Taconic TLX-9 PCB Construction Details

5. PCB Stackup (2-Layer Rigid Structure)

Type of artwork supplied: Gerber RS-274-X

9. Taconic TLX-9 PTFE/Woven Glass Laminate – Product Introduction

Taconic has over 35 years of experience coating fiberglass fabric with PTFE (polytetrafluoroethylene). This enables Taconic to manufacture copper clad PTFE/woven glass laminates with exceptionally well controlled electrical and mechanical properties.

The dielectric constant (Dk) range is 2.45 to 2.65. The Dk can be specified anywhere within this range with a tolerance of ±0.04. The dissipation factor is approximately 0.0019 when measured at 10 GHz.

TLX laminates can be sheared, drilled, milled and plated using standard methods for PTFE/woven fiberglass materials. The laminates are dimensionally stable, and exhibit virtually no moisture absorption during fabrication processes.

TLX laminates are generally ordered clad on one or both sides with 1/2, 1, or 2 oz. electrodeposited copper. Contact customer service for alternate claddings.

TLX laminates are tested in accordance with IPC-TM 650. A Certificate of Compliance containing actual test data accompanies each shipment.

13. Standard Thicknesses, Panel Sizes & Claddings

Standard Electrodeposited Copper Claddings

TLX-9 PCB 10mil EPIG (Nickle-free)
CCL 27 TLX-9

PCB specifications

Base materialTaconic TLX-9
Layer count2 layers
Board dimensions91.6mm x 45.3mm = 1 PCS, +/- 0.15mm
Minimum Trace/Space5/6 mils
Minimum Hole Size0.3mm
Blind viasNo
Finished board thickness0.3mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
Surface finishEPIG (Nickel-Free)
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com