BICHENGPCBBicheng Technologies Limited

TLX-8 2-Layer 31mil ENIG PCB for Extreme Environment RF Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

TLX-8 is PTFE fiberglass laminates, a type of high volume antenna material which offers reliability in a wide range of RF applications. This material is versatile due to its wide range available thicknesses and copper cladding. It is suitable for low layer count microwave designs, offering mechanical reinforcement wherever a substrate experiences severe environments such as:

Resistance to creep for PWBs bolted to a housing that encounters high levels of vibration during space launch High temperature exposure in engine modules Radiation resistance in space (see NASA's website for low outgassing materials) Resistance to extreme environments at sea for warship antennas Resistance to a wide temperature range for altimeter substrates during flight

Superior Signal Quality: Excellent PIM Values in PCBs (measured at lower than -160 dBc*) Mechanical Reliability: Excellent Mechanical & Thermal Properties Electrical Stability: Low and Stable Dk, Tightly Controlled DK, Low DF Environmental Durability: Dimensionally Stable, Low Moisture Absorption Safety Certification: UL 94 V0 Rating Design Optimization: For Low Layer Count Microwave Designs

Dielectric Constant @ 10 GHz: 2.55 ±0.04 (IPC-650 2.5.5.3) Dissipation Factor @ 10 GHz: 0.0018 (IPC-650 2.5.5.5.1) Surface Resistivity Elevated Temp.: 6.605 × 10^8 Mohm Surface Resistivity Humidity Cond.: 3.550 × 10^6 Mohm Volume Resistivity Elevated Temp.: 1.110 × 10^10 Mohm/cm Volume Resistivity Humidity Cond.: 1.046 × 10^10 Mohm/cm

MD After Bake: 0.06 mm/M (IPC-650 2.4.39 Sec. 5.4) CD After Bake: 0.08 mm/M (IPC-650 2.4.39 Sec. 5.4) MD Thermal Stress: 0.09 mm/M (IPC-650 2.4.39 Sec. 5.5) CD Thermal Stress: 0.10 mm/M (IPC-650 2.4.39 Sec. 5.5)

X: 21 ppm/°C (IPC-650 2.4.41/ASTM D 3386) Y: 23 ppm/°C (IPC-650 2.4.41/ASTM D 3386) Z: 215 ppm/°C (IPC-650 2.4.41/ASTM D 3386)

2% Weight Loss: 535°C (IPC-650 2.4.24.6 TGA) 5% Weight Loss: 553°C (IPC-650 2.4.24.6 TGA)

Moisture Absorption: 0.02% (IPC-650 2.6.2.1) Dielectric Breakdown: >45 Kv (IPC-650 2.5.6) Flammability Rating: V-0 (UL-94)

5. PCB Stackup (2-Layer Rigid Structure)

Copper Layer 1 - 35 μm Taconic TLX-8 Core - 0.787 mm (31mil) Copper Layer 2 - 35 μm

Components: 11 Total Pads: 34 Thru Hole Pads: 19 Top SMT Pads: 15 Bottom SMT Pads: 0 Vias: 27 Nets: 2

Radar systems Mobile communications Microwave test equipment Microwave transmission devices Couplers, splitters, combiners, amplifiers, antennas

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide

TLX-8 2-Layer PCB

PCB specifications

Base MaterialTLX-8
Layer Count2 layers
Board Dimensions25mm × 71mm = 1PC, ±0.15mm
Minimum Trace/Space4/6 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness0.8mm
Finished Cu Weight1oz (1.4 mils) outer layers
Via Plating Thickness20 μm
Surface FinishImmersion Gold
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com