BICHENGPCBBicheng Technologies Limited

Taconic RF-30A 2-Layer 0.6mm ENIG PCB – RF/Microwave Communication

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

RF-30A is a high-performance RF-grade laminate material engineered with advanced resin system and optimized glass fabric reinforcement, delivering exceptional high-frequency signal transmission performance, low dielectric loss and outstanding environmental stability. It is specifically designed for high-speed, high-frequency RF applications and can fully comply with 260℃ lead-free assembly processes, ensuring reliable performance in harsh operating conditions.

This 2-layer rigid PCB is constructed entirely with RF-30A as the core material, providing excellent signal integrity and thermal reliability for demanding RF and microwave circuits.

Thermal resistance: T260 >90 minutes, T288 >30 minutes

Peel strength (Min.): 9 lbs/inch for standard ED copper

CTE matched to copper: X axis 9-11 ppm/°C, Y axis 11-13 ppm/°C

Excellent CAF resistance and chemical resistance

High thermal conductivity for efficient heat dissipation

Exceptional high-frequency signal transmission performance

Low dielectric loss for improved signal integrity

Reliable performance in harsh operating conditions

CTE matched to copper for excellent plated-through hole reliability

Low moisture absorption ensures consistent electrical performance

Excellent CAF and chemical resistance for long-term reliability

Copper_layer_1 35 μm RF-30A 20 mil (0.508 mm) Copper_layer_2 35 μm

Components: 54 Total Pads: 43 Thru Hole Pads: 19 Top SMT Pads: 24 Bottom SMT Pads: 0 Vias: 36 Nets: 2

Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide

9.RF-30A High-Frequency Laminate – Product Introduction

RF-30A is a high-performance RF-grade laminate material engineered with an advanced resin system and optimized glass fabric reinforcement, delivering exceptional high-frequency signal transmission performance, low dielectric loss, and outstanding environmental stability. It is specifically designed for high-speed, high-frequency RF applications and can fully comply with 260℃ lead-free assembly processes, ensuring reliable performance in harsh operating conditions.

The material combines excellent electrical properties with robust mechanical characteristics, making it an ideal choice for demanding RF and microwave circuits where signal integrity and thermal reliability are critical.

Application areas

  • Dielectric Constant (DK): 3.0 at 10GHz
  • Dissipation Factor (Df): 0.003 at 10GHz
  • Thermal resistance: T260 >90 minutes, T288 >30 minutes
  • Peel strength (Min.): 9 lbs/inch for standard ED copper
  • CTE matched to copper: X axis 9-11 ppm/°C, Y axis 11-13 ppm/°C
  • Low Z-axis CTE: 38 ppm/°C
  • Tg: >180°C
  • Ultra-low moisture absorption: 0.08%
  • UL 94-V0 flammability rating
  • Excellent CAF resistance and chemical resistance
  • High thermal conductivity for efficient heat dissipation
20mil RF-30A PCB ENIG Finish
CCL 51 RF-30A

PCB specifications

Base materialRF-30A
Layer count2 layers
Board dimensions85.6mm x 99.8mm = 1PCS
Minimum Trace/Space4/6 mils
Minimum Hole Size0.25mm
Blind viasNo
Finished board thickness0.6mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
Surface finishElectroless Nickel Immersion Gold (ENIG)
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com