RF-60TC High Frequency PCB - 2-Layer Rigid PCB with Immersion Gold Finish
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
RF-60TC is a high-frequency material that features excellent thermal conductivity, combining ceramic-filled, glass-reinforced PTFE laminate for high-power RF and microwave applications. It is specifically engineered to operate at lower temperatures in demanding applications while enhancing gains and efficiencies in miniaturized antenna designs within the 6.15 DK market. This is achieved through improved dielectric heat dissipation and exceptionally low dielectric losses.
The superior heat transfer properties of RF-60TC provide additional design margins, extending the lifespan of active components and improving long-term reliability. Furthermore, RF-60TC exhibits excellent adhesion to low-profile and reverse-treated copper, minimizing insertion loss. Its low coefficient of thermal expansion (CTE) and enhanced dimensional stability facilitate the construction of high layer count multilayer PCBs with improved plated through-hole reliability.
Glass-reinforced PTFE ceramic composites Dielectric constant (Dk) of 6.15 at 10 GHz Dissipation factor of 0.002 at 10 GHz and 23°C Thermal coefficient of Dk of -3.58 ppm/°C over the range of -50°C to 150°C Low moisture absorption of 0.03% High thermal conductivity of 0.9 W/m*K (unclad), 1.0 W/m*K (0.5 oz), 1.05 W/m*K (1 oz) CTE values of 9.9 ppm/°C in the X and Y axes, and 40 ppm/°C in the Z-axis
Improved loss tangent High thermal conductivity Enhanced dimensional stability Low Z-axis CTE of 40 ppm/°C Excellent adhesion to metals Stable dielectric constant over frequency Stable dielectric constant over temperature Low moisture absorption
4. PCB Stackup: 2-Layer Rigid PCB Copper Layer 1: 70 µm RF-60TC Core: 0.508 mm (20 mil) Copper Layer 2: 70 µm
Board dimensions: 200 mm x 62 mm (1 piece), +/- 0.15 mm Minimum trace/space: 4/5 mils Minimum hole size: 0.2 mm No blind vias Finished board thickness: 0.6 mm Finished copper weight: 1 oz (1.4 mils) for outer layers Via plating thickness: 20 µm Surface finish: Immersion gold Top silkscreen: White Bottom silkscreen: None Top solder mask: Green Bottom solder mask: None 100% electrical testing conducted prior to shipment
6. PCB Statistics Components: 44 Total pads: 99 Through-hole pads: 68 Top SMT pads: 31 Bottom SMT pads: 0 Vias: 47 Nets: 2
7. Type of Artwork SuppliedGerber RS-274-X
High-power amplifiers Miniaturized antennas GPS, patch antennas, RFID readers Filters, couplers, and dividers Satellite communications
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
