BICHENGPCBBicheng Technologies Limited

Rogers RT/duroid 6006 2-Layer 0.4mm Immersion Silver PCB – High Dk Microwave Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

MOQ
1PCS
Lead time
7-10 working days
Packaging
Vacuum / Anti-static Packaging
Payment
T/T, Paypal

Brief introduction

1. Introduction to Rogers RT/duroid 6006 PCB

Rogers RT/duroid 6006 laminates are ceramic-PTFE composites designed for electronic and microwave circuit applications requiring a high dielectric constant. They provide high dielectric constants (Dk) to enable circuit size reduction. These materials are low loss, ideal for operating at X-band or below. Additionally, their tight Dk and thickness control deliver repeatable circuit performance.

RT/duroid 6006 microwave laminates feature ease of fabrication and stability in use. They have tight dielectric constant and thickness control, low moisture absorption, and good thermal mechanical stability.

This 2-layer rigid PCB is constructed entirely with Rogers RT/duroid 6006 as the core material, making it ideal for patch antennas, satellite communications systems, power amplifiers, and ground radar warning systems.

2. Key Features of Rogers RT/duroid 6006 PCB

Rogers RT/duroid 6006 ceramic-PTFE composites

Dissipation factor of 0.0027 at 10 GHz/23°C

CTE X-axis: 47 ppm/°C, Y-axis: 34 ppm/°C, Z-axis: 117 ppm/°C

Clad with standard and reverse treated electrodeposited copper foil

3. Benefits of Rogers RT/duroid 6006 PCB

High dielectric constant for circuit size reduction

Low loss, ideal for operating at X-band or below

Tight εr and thickness control for repeatable circuit performance

Reliable plated through-holes in multi-layer boards

Ease of fabrication and stability in use

4.Rogers RT/duroid 6006 PCB Construction Details

5. PCB Stackup (2-Layer Rigid Structure)

Type of artwork supplied: Gerber RS-274-X (typical, not explicitly stated in source)

9. Rogers RT/duroid 6006 Ceramic-PTFE Laminate – Product Introduction

RT/duroid 6006 microwave laminates are ceramic-PTFE composites designed for electronic and microwave circuit applications requiring a high dielectric constant. RT/duroid 6006 laminate is available with a dielectric constant value of 6.15. RT/duroid 6006 microwave laminates feature ease of fabrication and stability in use. They have tight dielectric constant and thickness control, low moisture absorption, and good thermal mechanical stability.

RT/duroid 6006 laminates are supplied clad on both sides with 1/2 oz. to 2 oz./ft² (18 to 70 μm) standard and reverse treated electrodeposited copper foil. Thick aluminum, brass, or copper plate on one side may be specified.

Standard tolerance dielectric thicknesses of 0.010", 0.025", 0.050", 0.075", and 0.100" (0.254, 0.635, 1.270, 1.905, 2.54 mm) are available. When ordering RT/duroid 6006 laminates, it is important to specify dielectric thickness and weight of copper foil required.

13. Standard Thicknesses, Panel Sizes & Claddings

Electrodeposited Copper Foil: ½ oz (18 μm) HH/HH, 1 oz (35 μm) H1/H1

RTduroid 6006 PCB 10mil Immersion Silver
CCL 113 RTduroid 6006

PCB specifications

Base materialRogers RT/duroid 6006
Layer count2-layer rigid PCB
Board dimensions134.8mm x 78.65mm = 2 Types = 2 PCS, +/- 0.15mm
Minimum Trace/Space5/6 mils
Minimum Hole Size0.3mm
Blind viasNo
Finished board thickness0.4mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
Surface finishImmersion Silver
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com