Rogers DiClad 870 2-Layer 5mil Low-Dk PTFE PCB with Immersion Silver
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- MOQ
- 1PCS
- Lead time
- 6-10 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
Rogers DiClad 870 laminates are woven fiberglass reinforced, PTFE-based composites that offer lower dielectric constant for use as printed circuit board substrates. By using fewer plies of woven fiberglass and a higher ratio of PTFE content, the DiClad 870 laminates offer lower dielectric constants (Dk) and dissipation factors at a similar thickness to other laminates in the DiClad series.
DK of 2.33 at 10 GHz and 1 MHz, 50% RH Dissipation factor of 0.0013 at 10 GHz, 0.0009 at 1MHz, 50% RH TcDK of -161 ppm/°C ranging -10~140°C, 10 GHz Arc Resistance >180 seconds Moisture Absorption 0.02% CTE in X-axis of 17 ppm/°C, Y-axis of 29ppm/°C and Z-axis of 217ppm/°C Copper Peel Strength of 14 lbs/in, 10s @288°C Flammability of UL 94-V0 grade
Lowest moisture absorption among PTFE based composites Stable Dk over a wide frequency range Low Dk supports wider line widths for lower insertion loss Higher PTFE content for improved electrical performance Excellent copper peel strength for reliable assembly
Copper layer 1 – 35 μm DiClad 870 – 0.127 mm (5mil) Copper layer 2 – 35 μm
Components: 23 Total Pads: 52 Thru Hole Pads: 29 Top SMT Pads: 23 Bottom SMT Pads: 0 Vias: 19 Nets: 2
Radar Feed Networks Commercial Phased Array Networks Low Loss Base Station Antennas Guidance Systems Digital Radio Antennas Filters, Couplers, LNAs
Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
